GSO IEC 60315-1:2014
测量不同类别广播的无线电接收机的方法 第1部分:一般注意事项和测量方法 包括音频测量

Methods of measurement on radio receivers for various classes of emission. Part 1: General considerations and methods of measurement, including audio-frequency measurements


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 GSO IEC 60315-1:2014 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
GSO IEC 60315-1:2014
发布
2014年
发布单位
GSO
当前最新
GSO IEC 60315-1:2014
 
 
适用范围
This standard applies to radio receivers of any kind, excluding television receivers, and to the parts of which they are composed or which are used as auxiliaries to such receivers, excluding those dealt with in IEC Publications 94, 98 and 268. This standard deals with the determination of performance, the comparison of equipment and the determination of proper practical applications by listing the characteristics which are useful for specifications and laying down uniform methods of measurement for these characteristics. This standard is confined to a description of the different characteristics and the relevant methods of measurement; it does not in general specify performance requirements. The complete standard consists of the following pa rts, in which the characteristics of various types of receiver and their methods of measurement are specified; some parts include preferred Values: — Part 1: General considerations and methods of measurement, including audio-frequency measurements (IEC Publication 315-1 (1988)). — Part 3: Radio-frequency measurements on receivers for amplitude-modulated emissions (Publication 315-3 (1973)). — Part 4: Radio-frequency measurements on receivers for frequency modulated sound-broadcasting emissions (Publication 315-4 (1982)). — Part 5: Specialized radio-frequency measurements. Measurements on frequency-modulated receivers of the response to impulsive interference (Publication 315-5 (1971)). — Part 8: Radio-frequency measurements on professional receivers for frequency-modulated telegraphy systems (Publication 315-8 (1975)). The standard does not deal with safety, for which reference is required to IEC Publication 65 or other appropriate I EC safety standards, nor with radiation and immunity, for which reference is required to C.I.S:P.R. Publication 13.

GSO IEC 60315-1:2014相似标准


推荐

计量与测量区别

不过,电子测量仪器中也有能覆盖很宽量程情况,如一台完善频率计数器能测量10~10赫频率,量程为1:10。一般说来,同类量在不同频段测量计量所用方法器具往往不同。但也存在不少频程很宽测量器具,如从音频直到40吉赫频谱分析仪和 0~18吉赫标准衰减器等。...

采用模块化仪器应对新兴音频视频测试

典型视频测试包括同步脉冲幅度、chroma/luma增益、差分增益差分相位。典型音频测试包括增益、噪声电平、信噪比总谐波失真。   该测试方案通过软件修改能够轻松地扩展到数字电视标准。在音频视频信号产生部分,PXI-5671矢量信号发生器有很强软件定义无线电能力,还有高达2.7GHz输出频率范围20MHz实时宽带。...

早安晚安,“助”您入口即安-赛默飞ICPMS助力食品安全之多元素分析

其中1天至5天进行单独分析,6天至9天对所有样品基质组进行混合分析,不仅单个测量回收率极其稳定,在对所有不同基质类型回收率进行比较时,回收率同样保持一致,这进一步证明,不同类型食品饮料样品基质可以灵活分析,也可以在单一方法中混合,对数据质量或测量可靠性无任何负面影响。通过近两周对1878个不同样品成功测量,证明了所开发方法稳健性。...

万用表结构组成

选择开关  万用表选择开关是一个多档位旋转开关。用来选择测量项目量程。一般万用表测量项目包括:“mA”;直流电流、“V(-)":直流电压、“V(~)”:交流电压、“Ω”:电阻。每个测量项目又划分为几个不同量程以供选择。  表笔表笔插孔  表笔分为红、黑二只。使用时应将红色表笔插入标有“+”号插孔,黑色表笔插入标有“-”号插孔。  ...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号