GSO IEC 61156-6-1:2014由GSO 发布于 2014-12-25。
GSO IEC 61156-6-1:2014在国际标准分类中归属于: 33.120.20 导线和对称电缆。
GSO IEC 61156-6-1:2014 用于数字通信的对称双工/四芯多芯电缆 第6-1部分:传输特性高达 1000 MHz 的对称双工/四芯电缆 工作区布线 详细规范正在准备中的最新版本是哪一版?
最新版本是 GSO IEC 61156-6-1:2014 。
This part of IEC 61156 describes symmetrical pair/quad cables intended primarily for work area cabling as defined in ISO/IEC 11801 and ISO/IEC 24702. NOTE Environmental classifications are presented in ISO/IEC 24702 with three levels of severity in four areas: mechanical, ingress, climatic, and electromagnetic: thus, in tabular form, they are referred to as the “MICE table”. This blank detail specification includes recommended environmental characteristics and severities which are derived from the environmental classifications that are specified for cabling for various environments. The blank detail specification determines the layout and style for detail specifications describing symmetrical pair/quad cables with transmission characteristics up to the maximum frequency of the respective category for digital communications. Detail specifications, based on the blank detail specification, may be prepared by a national organization, a manufacturer or a user.
测试重点由于建筑物间的室外光缆较长,实地检查光纤以及常见熔接点比较困难。推荐产品OptiFiber® Pro光时域反射仪(OTDR)02主配线区Main Distribution Area, MDA内含有核心交换机和路由器,用于连接LAN、SAN和数据中心的其他区域。测试重点主要测试带有双工LC/SC连接或多芯MPO连接的单模或多模光纤。...
所以采用DB-9的9芯插头座,传输线采用屏蔽双绞线。 (3)传输电缆长度 由RS-232C标准规定在码元畸变小于4%的情况下,传输电缆长度应为50英尺,其实这个4%的码元畸变是很保守的,在实际应用中,约有99%的用户是按码元畸变10-20%的范围工作的,所以实际使用中zui大距离会远超过50英尺,美国DEC公司曾规定允许码元畸变为10%而得出附表2 的实验结果。...
3)三类线:指目前在ANSI和EIA/TIA568标准中的电缆,该电缆的传输频率16MHz,用于语音传输及高传输速率为10Mbps的数据传输主要用于10BASE--T。 4)四类线:该类电缆的传输频率为20MHz,用于语音传输和高传输速率16Mbps的数据传输主要用于基于令牌的局域网和 10BASE-T/100BASE-T。 ...
所以,必须不断地加强对电线电缆产品质量的质量检验工作。 电缆对称性设计:对于1.8/3KW及以下变频电机电缆,和对称3+1芯和4芯电缆仅可用于主电源的输入缆,但使用对称结构电缆。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号