CAN/CGSB-3.23-2023

Aviation turbine fuel (Grades JET A and JET A-1)


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 CAN/CGSB-3.23-2023 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
CAN/CGSB-3.23-2023
发布
2023年
发布单位
SCC
当前最新
CAN/CGSB-3.23-2023
 
 
代替标准
75.160.20
被代替标准
CAN/CGSB-3.23-2020
适用范围
1 Scope This National Standard of Canada applies to two grades of kerosene-type aviation turbine fuel (grades JET A and JET A-1), consisting of conventional hydrocarbons, synthetic hydrocarbons, naturally occurring non-hydrocarbons and additives as specified herein. The fuels are normally used in civil aviation operations. The two grades differ only in freezing point. Grade JET A has a maximum freezing point of -40 °C and Grade JET A-1 has a maximum freezing point of -47 °C. Kerosene-type aviation turbine fuels are distillates with a minimum flash point of 38 °C. Limitations for use – Aircraft operators should consult their aircraft manuals for the type of fuel, fuel additives and any temperature-related or other limitations. Temperature limitations – When temperatures are close to the fuel freezing point, fuel operability problems can be experienced. JET A, with a specification freezing point of -40 °C, is not intended for use during extremely cold weather conditions or when the ambient temperature is close to or below -40 °C. It also requires more restrictive use than JET A-1. For more information concerning temperature limitations, see Transport Canada’s Airworthiness Notice No. B021 (par. 2.2) and 10.3 in this standard. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. Units of measurement – Quantities and dimensions in this standard are provided in metric units from the International System of Units (SI units). This standard expresses the industry standard nominal units of measurement in North America of “% by mass” and “% by volume”. The SI equivalent expressions for these units are “% m/m” and “% V/V” respectively.

CAN/CGSB-3.23-2023相似标准





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号