GSO IEC/TS 62556:2017
超声波 场表征 高强度治疗超声 (HITU) 换能器和系统的场参数规范和测量

Ultrasonics - Field characterization - Specification and measurement of field parameters for high intensity therapeutic ultrasound (HITU) transducers and systems


GSO IEC/TS 62556:2017 发布历史

GSO IEC/TS 62556:2017由GSO 发布于 2017-10-03。

GSO IEC/TS 62556:2017在国际标准分类中归属于: 17.140.50 电声学。

GSO IEC/TS 62556:2017 超声波 场表征 高强度治疗超声 (HITU) 换能器和系统的场参数规范和测量的最新版本是哪一版?

最新版本是 GSO IEC/TS 62556:2017

GSO IEC/TS 62556:2017的历代版本如下:

  • 2017年 GSO IEC/TS 62556:2017 超声波 场表征 高强度治疗超声 (HITU) 换能器和系统的场参数规范和测量

 

This technical specification is applicable to high intensity therapeutic ultrasound (HITU) devices, specifying: – relevant parameters for quantifying the field; – measurement methods at relatively low output levels and methodology for extrapolating these to higher therapeutic level fields; – consideration of sidelobes and pre-focal maxima; – parameters relevant to HITU transducers of different construction and geometry, including non-focusing, focusing with or without lenses, collimated, diverging and convergent transducers, multi-element transducers, scanning transducers and multiple sources. This technical specification is intended to support the ultrasonic measurement requirements given in IEC 60601-2-62. These specifications would have use in quality assurance, safety testing, and the standardization of communications regarding the clinical performance of HITU systems. Where possible, this technical specification incorporates specifications from other related standards. This technical specification does not apply to the following types of devices, which are covered by other standards: – lithotripters (see IEC 61846); – surgical equipment (see IEC 61847); – physiotherapy devices (see IEC 61689). Throughout this technical specification SI units are used. In the specification of certain parameters, such as beam-areas and intensities, it may be convenient to use decimal multiples or sub-multiples. For example, beam-area may be specified in cm² and intensities in W/cm² or mW/cm².

标准号
GSO IEC/TS 62556:2017
发布
2017年
发布单位
GSO
当前最新
GSO IEC/TS 62556:2017
 
 

GSO IEC/TS 62556:2017相似标准


推荐

E+H超声波流量计优缺点

E+H超声波流量计具有不扰乱流、无可动部件、无压力损失、测量精度高、性能稳定可靠、测量范围宽等特点,并且携带方便,安装简单,不影响管路系统及设备正常运行,因此广泛地应用于液体和气体计量。那我们生产生活中经常使用到超声波流量计,所以要对它有一个相当认识和了解,尤其是在安装维护保养中应该注意哪些方面?...

超声波流量计基本原理

超声波流量计由超声波换能器、电子线路及流量显示累积系统三部分组成。超声波发射换能器将电能转换为超声波能量,并将其发射到被测流体中,接收器接收到超声波信号,经电子线路放大并转换为代表流量电信号供给显示积算仪表进行显示积算。这样就实现了流量检测显示。   超声波流量计常用压电换能器。它利用压电材料压电效应,采用适出发射电路把电能加到发射换能器压电元件上,使其产生超声波振劝。...

压电MEMS超声波换能器设计(一)

我们对系统进行了改良(图1),利用压电MEMS超声波换能器(PMUT)来监测水箱中液位,并定期将测量结果上传到网关设备中。图1:槽罐液位监测系统框图压电MEMS超声波换能器在罐体中发射超声波,然后测量被液体表面反射波,从而得到一个很小模拟机械波(需要放大)。发射波与反射波之间时间差与液体距离成正比。...

相机超声波清洗机--2020年威固特超声波

超声波清洗机构成   编辑   超声波清洗机主要由超声波清洗槽超声波发生器两部分构成。超声波清洗槽用结实弹性好、耐腐蚀优质不锈钢制成,底部安装有超声波换能器振子;超声波发生器产生高频高压,通过电缆联结线传导给换能器换能器与振动板一起产生高频共振,从而使清洗槽中溶剂受超声波作用对污垢入行洗净。   ...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号