GSO ASTM D5842:2022
用于挥发性测量的燃料采样和处理的标准实施规程

Standard Practice for Sampling and Handling of Fuels for Volatility Measurement


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 GSO ASTM D5842:2022 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
GSO ASTM D5842:2022
发布
2022年
发布单位
GSO
当前最新
GSO ASTM D5842:2022
 
 
适用范围
1.1 This practice covers procedures and equipment for obtaining, mixing, and handling representative samples of volatile fuels for the purpose of testing for compliance with the standards set forth for volatility related measurements applicable to light fuels. 1.2 The applicable dry vapor pressure equivalent range of this practice is 13 kPa to 110 kPa (2 psia to 16 psia). 1.3 This practice is applicable to the sampling, mixing, and handling of reformulated fuels including those containing oxygenates. This practice is not applicable to crude oil. For the sampling of crude oil, refer to Practice D4057/API MPMS Chapter 8.1, Practice D4177/API MPMS Chapter 8.2, and Practice D8009/API MPMS Chapter 8.5. 1.4 The values stated in SI units are to be regarded as the standard except in some cases where drawings may show inch-pound measurements, which are customary for that equipment. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

GSO ASTM D5842:2022相似标准


推荐

江苏《汽车维修行业大气污染物排放标准》二次征求意见稿

5.3.2 采用溶剂型其他多种类型涂料喷涂采样时段应当包括溶剂型涂料喷涂工况。  5.4采样方法与分析方法  5.4.1 大气污染物分析测定应按照表4规定方法执行。  5.4.2 本标准实施后国家或省发布污染物监测方法标准,如适用性满足要求,同样适用于标准相应污染物测定。  ...

4月1日实施!关于油气回收检测仪,请务必确认这些内容……

★★新增“处理效率”油气经油气处理装置处理排放量削减百分比,根据同步检测油气处理装置进口出口油气排放量进行计算,油气排放量是废气排气流量油气排放浓度乘积。进一步明确了处理装置处理效率计算方法,将原来排气浓度计算处理效率修改为根据油气排放量计算处理效率,除了测量油气排放浓度之外,还要进行废气排气流量测量。...

加油站/储油库/油品运输三项大气污染物排放标准详细解读

★★新增“处理效率”油气经油气处理装置处理排放量削减百分比,根据同步检测油气处理装置进口出口油气排放量进行计算,油气排放量是废气排气流量油气排放浓度乘积。进一步明确了处理装置处理效率计算方法,将原来排气浓度计算处理效率修改为根据油气排放量计算处理效率,除了测量油气排放浓度之外,还要进行废气排气流量测量。...

关于全自动石油产品热值测定仪热容量精密度要求

关于全自动石油产品热值测定仪热容量精密度要求北京卓锐全自动石油产品热值测定仪符合GB/T384,用于测定各种燃料油热值检测,石油,轻油,重油,柴油,煤焦油,沥青,酒精,化工油,石蜡油,蓖麻油,奥里油,轮胎油,植物油,烧火油,石脑油等醇基燃料,甲醇燃料等可燃性固体或粘稠液体物质发热量。适用于电力、生物质、造纸、石化、水泥、农牧、医药科研、教学等行业部门测量固体类、建材类、石油等可燃物热值。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号