ASTM D4389/D4389M-23
用粗纱织造的成品玻璃织物的标准规范

Standard Specification for Finished Glass Fabrics Woven From Rovings

ASTM D4389/D4389M-23 发布历史

ASTM D4389/D4389M-23由美国材料与试验协会 US-ASTM 发布于 2023-06-01。

ASTM D4389/D4389M-23在国际标准分类中归属于: 59.100.10 纺织玻璃纤维材料。

ASTM D4389/D4389M-23 用粗纱织造的成品玻璃织物的标准规范的最新版本是哪一版？

最新版本是 ASTM D4389/D4389M-23 。

ASTM D4389/D4389M-23 发布之时，引用了标准

• ASTM D123 与纺织品有关的标准术语*， 2023-09-14 更新
• ASTM D1776/D1776M 纺织品调节和试验的标准实施规程*， 2024-06-01 更新
• ASTM D2408 ASTM D2408-82
• ASTM D2410 ASTM D2410-82
• ASTM D2660 ASTM D2660-84
• ASTM D3098 ASTM D3098-84
• ASTM D3773/D3773M 织物长度的标准测试方法
• ASTM D3774 纺织品宽度的标准试验方法
• ASTM D3775 纺织品织物结构计算的试验方法
• ASTM D3776/D3776M 织物单位面积（重量）质量标准试验方法*， 2024-07-01 更新
• ASTM D4029/D4029M 成品机织玻璃织物的标准规范
• ASTM D4963/D4963M 玻璃纤维原丝和织物着火损失的标准试验方法
• ASTM D578/D578M 玻璃纤维绞线的标准规范
• ASTM D7018/D7018M 有关玻璃纤维及其制品的标准术语*， 2024-07-01 更新

* 在 ASTM D4389/D4389M-23 发布之后有更新，请注意新发布标准的变化。

ASTM D4389/D4389M-23的历代版本如下：

• 2023年 ASTM D4389/D4389M-23 用粗纱织造的成品玻璃织物的标准规范
• 2016年 ASTM D4389/D4389M-16 粗纱织成精制玻璃织物的标准规格
• 2004年 ASTM D4389/D4389M-04(2010)e1 粗纱精制玻璃布的标准规范
• 2004年 ASTM D4389-04 粗纱精制玻璃布的标准规范
• 1999年 ASTM D4389-99 粗纱精制玻璃布标准规范

1.1 This specification primarily covers glass fabrics woven from “E” electrical continuous glass fiber rovings that are intended primarily as a reinforcing material in laminated plastics for structural use. 1.2 This specification specifies the terminology, definitions, general requirements, and physical requirements for woven roving glass fiber fabrics. This specification permits the application of sizing materials to the glass fiber roving during manufacture that helps facilitate weaving. When used as permitted in this specification, such materials are compatible with the resin matrix as specified in the contracting instrument. NOTE 1—Sizing materials on glass fiber yarns, in most cases, are removed by various cleaning procedures as a first stage in preparing a finished fabric. When these yarn sizing materials are removed during a cleaning procedure, they need not be compatible with the subsequent resin matrix. 1.3 Units—The values stated in either SI units or inchpound units are to be regarded as standard. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems will result in nonconformance with the standard. NOTE 2—This specification is one of a series to provide a substitute for the following Military Specifications: MIL-Y-1140H Yarn, Cord, Sleeving, Cloth, and Tape-Glass MIL-C-9084C Cloth, Glass Finished for Resin Laminates MIL-C-19663C Cloth, Glass, Woven Roving for Plastic Laminates 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

标准号

ASTM D4389/D4389M-23

发布

2023年

发布单位

美国材料与试验协会

当前最新

ASTM D4389/D4389M-23

 

 

引用标准

ASTM D123 ASTM D1776/D1776M ASTM D2408 ASTM D2410 ASTM D2660 ASTM D3098 ASTM D3773/D3773M ASTM D3774 ASTM D3775 ASTM D3776/D3776M ASTM D4029/D4029M ASTM D4963/D4963M ASTM D578/D578M ASTM D7018/D7018M

ASTM D4389/D4389M-23相似标准

推荐

谁引用了ASTM D4389/D4389M-23 更多引用