GSO ISO 22262-3:2021
空气质量散装材料 第3部分:X射线衍射法定量测定石棉

Air quality — Bulk materials — Part 3: Quantitative determination of asbestos by X-ray diffraction method


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 GSO ISO 22262-3:2021 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
GSO ISO 22262-3:2021
发布
2021年
发布单位
GSO
当前最新
GSO ISO 22262-3:2021
 
 
适用范围
ISO 22262-3:2016 is primarily intended for quantitative analysis of samples in which asbestos has been identified at estimated mass fractions lower than approximately 5 % by weight. ISO 22262-3:2016 extends the applicability and limit of detection of quantitative analysis by the use of simple procedures of ashing and/or acid treatment prior to XRD quantification. ISO 22262-3:2016 is applicable to the asbestos-containing materials identified in ISO 22262‑1. The following are examples of sample matrices: a) any building materials in which asbestos was detected by the analysis in ISO 22262‑1; b) resilient floor tiles, asphaltic materials, roofing felts and any other materials in which asbestos is embedded in an organic matrix and in which asbestos was detected when using ISO 22262‑1; c) wall and ceiling plasters, with or without aggregate, in which asbestos was detected when using ISO 22262‑1. If non-asbestiform serpentine or non-asbestiform amphibole minerals are included in the matrix, the XRD peaks that are assumed to be "possible peaks of asbestos" will represent these minerals. This method is not for application to natural minerals that may contain asbestos or any products that incorporate such natural minerals. This method is intended only for application to building material samples that contain deliberately added commercial grade asbestos including tremolite asbestos. ISO 22262-3:2016 is intended for use by analysts who are familiar with X-ray diffraction methods and the other analytical procedures specified in the References [5] and [6]. It is not the intention of this part of ISO 22262 to provide basic instruction in the fundamental analytical procedures.

GSO ISO 22262-3:2021相似标准


推荐

徕卡偏光显微镜助力石棉检测

美国国家职业安全卫士研究所,Niosh_9000X射线衍射法;c. ISO/DIS 22262-1空气质量散装材料1部分:商业散装材料石棉的取样和定性确定。...

X射线衍射仪(XRD)对石棉的测试

该方法可辨石棉种类,并进行定量分析,和石棉相关的XRD检测方法及标准有:GB/T 23263-2009 制品中石棉含量测定方法GB 38469-2019 船舶涂料中有害物质限量GB/T 33395-2016 涂料中石棉测定SN/T 2649.2-2010 进出口化妆品中石棉测定NIOSH 9000-2015 石棉/温石棉的XRD分析方法ISO 22262-3-2016 空气质量 散体物料 3部分...

致癌物-石棉的有效检测方法

1.X射线衍射法(XRD)依据是每种矿物都具有特定的X射线衍射数据和图谱,且衍射峰强度与含量成正比,可判断试样中是否含有某种石棉矿物并测定其含量。X射线衍射法具有样品处理简单、用量少、快速有效等特点,可鉴定石棉种类,并进行定量分析。布拉格方程:2dsinθ=nλθ为入射角、d为晶面间距、n为衍射级数、λ为入射线波长,2θ为衍射角。  2.光学显微镜 a. 相差显微镜b....

快速定性&一键定量 | XRD让汽车制品中石棉无所遁形

3岛津X射线衍射仪一键定量利用抽滤,将不同质量的温石棉纯品,均匀的分散到滤膜上,并利用岛津X射线衍射仪专用附件进行测试;通过岛津基于“标准基础吸收修正法”的专业软件进行强度修正,即可建立工作曲线,如图2所示,线性良好。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号