ASTM A792/A792M-23
钢板标准规范 55 % 热浸镀铝锌合金
Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
ASTM A792/A792M-23 发布历史
ASTM A792/A792M-23由美国材料与试验协会 US-ASTM 发布于 2023-10-01。
ASTM A792/A792M-23在国际标准分类中归属于: 77.140.50 扁平钢和半成品。
ASTM A792/A792M-23 钢板标准规范 55 % 热浸镀铝锌合金的最新版本是哪一版？
最新版本是 ASTM A792/A792M-23 。
ASTM A792/A792M-23 发布之时，引用了标准
- ASTM A1122/A1122M 评估涂层附着力的金属涂层钢板弯曲试验的标准试验方法
- ASTM A568/A568M 热轧和冷轧低合金结构和高强度碳素钢薄板的一般要求
- ASTM A90/A90M 用锌或锌合金涂层的钢铁制品涂层重量[质量]的标准试验方法
- ASTM A902 金属涂覆钢产品的相关标准术语
- ASTM A924/A924M 热浸镀锌法制成的金属涂层钢板的一般要求
- ASTM E517 金属板材塑性应变比 r 的标准试验方法*， 2024-03-01 更新
- ASTM E646 金属薄板材拉伸应变硬化指数 (n值) 的标准试验方法*， 2024-07-01 更新
* 在 ASTM A792/A792M-23 发布之后有更新，请注意新发布标准的变化。
ASTM A792/A792M-23的历代版本如下：
- 2023年 ASTM A792/A792M-23 钢板标准规范 55 % 热浸镀铝锌合金
- 2022年 ASTM A792/A792M-22 热浸镀55%铝锌合金薄钢板的标准规范
- 2021年 ASTM A792/A792M-21a 使用热浸镀锌工艺对55%铝锌合金涂层钢板的标准规范
- 2021年 ASTM A792/A792M-21 热浸镀55%铝锌合金薄钢板的标准规范
- 2010年 ASTM A792/A792M-10(2015) 使用热浸镀锌工艺对55%铝锌合金涂层钢板的标准规格
- 2010年 ASTM A792/A792M-10 热浸处理用55%铝锌合金涂覆的薄钢板的标准规格
- 2009年 ASTM A792/A792M-09a 热浸处理用55%铝-锌合金涂覆的薄钢板用标准规范
- 2009年 ASTM A792/A792M-09 热浸镀55%铝锌合金薄钢板的标准规范
- 2008年 ASTM A792/A792M-08 热浸镀55%铝锌合金薄钢板的标准规范
- 2006年 ASTM A792/A792M-06a 热浸处理用55%铝锌合金涂覆的薄钢板的标准规格
- 2006年 ASTM A792/A792M-06 热浸处理用55%铝锌合金涂覆的薄钢板的标准规格
- 2005年 ASTM A792/A792M-05 热浸镀55%铝锌合金薄钢板的标准规范
- 2003年 ASTM A792/A792M-03 热浸镀55%铝锌合金薄钢板的标准规范
- 2002年 ASTM A792/A792M-02 热浸镀55%铝锌合金薄钢板的标准规范
- 2001年 ASTM A792/A792M-01a 热浸镀55%铝锌合金薄钢板的标准规范
- 2002年 ASTM A792/A792M-01 热浸镀55%铝锌合金薄钢板的标准规范
- 2002年 ASTM A792/A792M-99 热浸镀55%铝锌合金薄钢板的标准规范
1.1 This specification covers 55 % aluminum-zinc alloycoated steel sheet in coils and cut lengths. 1.2 This product is intended for applications requiring corrosion resistance or heat resistance, or both. 1.3 The product is produced in a number of designations, types, and grades which are designed to be compatible with differing application requirements. 1.4 Product furnished under this specification shall conform to the applicable requirements of the latest issue of Specification A924/A924M, unless otherwise provided herein. 1.5 The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of this specification. 1.6 Units—This specification is applicable to orders in either inch-pound units (as A792) or SI units (as A792M). Values in inch-pound and SI units are not necessarily equivalent. Within the text, SI units are shown in brackets. Each system shall be used independent of the other. 1.7 Unless the order specifies the “M” designation (SI units), the product shall be furnished to inch-pound units. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- 标准号
- ASTM A792/A792M-23
- 发布
- 2023年
- 发布单位
- 美国材料与试验协会
- 当前最新
- ASTM A792/A792M-23
- 引用标准
- ASTM A1122/A1122M ASTM A568/A568M ASTM A90/A90M ASTM A902 ASTM A924/A924M ASTM E517 ASTM E646