GSO EN 13042-2:2011
平板玻璃制造、加工和加工设备和工厂 安全要求 第2部分:进料中使用的处理装置

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 GSO EN 13042-2:2011 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
GSO EN 13042-2:2011
发布
2011年
发布单位
GSO
当前最新
GSO EN 13042-2:2011
 
 
适用范围
This document contains the requirements for safety for the design and installation of stationary handling machines for feeding from the taking up of a post of melted glass out of the working bowl of a glass melting furnace through transport to delivery to a glass blower or to a forming machine for hollow glass. 1.2 This European Standard deals with all significant hazards, hazardous situations and events relevant to handling machines for feeding, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from significant hazards during commissioning, operation and maintenance. 1.3 This European Standard does not deal with feeding with shears alone, with the transport of the melted glass post by its own weight in free fall or by trueing (gob feeder, see EN 13042-1). 1.4 This document is not applicable to handling machines for feeding which are manufactured before the date of publication of this document by CEN.

GSO EN 13042-2:2011相似标准


推荐

影响中空玻璃质量因素

部分玻璃加工厂使用中空玻璃生产线都是半自动式板压或辊压生产设备,其生产节奏快慢主要受限于压片机速度和在线清洗机速度。若想提高一次提交成品率,就必须落实合片前各个工序自检互检,从上片检查、铝框制作乃至丁基胶涂布,尤其是要注意上框工序质量检查,因为任何缺陷在该工序都基本可以显现出来,而且在合片前能较容易地进行补救处理。...

医院污水处理系统代加工厂

2、污水处理适用范围主要是用于住宅小区、村镇、办公楼、商场、酒店、餐馆、工厂、学校、部队、矿山、疗养院、旅游景区等等一些生活污水或者类似的屠宰、水产品加工、食品加工、水果加工等中小型规模工业有机废水处理回用。经过污水处理技术处理污水,排放水质达到了国际污水处理技术综合排放要求。3、污水处理机市场设备一般组成部分有水解酸化池、接触氧化池、杂质沉淀池、消毒处理池、污泥消化池。...

山东泵站代加工厂介绍

1、液位控制设备电子仪表装置应安装于控制柜内。2、安装固定液位控制器及悬挂电缆应避免缠结或末端在泵站入口,控制器应避免被障碍物干扰。3、起停液位设置,一台潜水泵必须设置2个液位使用2台潜水泵至少设置3个液位使用。4、控制装置应实现泵站液位自动控制运行。...

实验室中经常出现哪些名词让你经常混淆?(二)

2制造商/产品生产者:一个进行或控制产品设计、制造、评定、处理存储等阶段,使其能对产品持续地符合有关要求负责,并在那些方面承担全部责任位于一个或若干个固定地点法人组织。 3、生产厂(生产场地)/被委托生产企业:对认证产品进行最终装配/或试验以及使用认证标志认证机构对其实施跟踪服务场所。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号