ASTM A276/A276M-23由美国材料与试验协会 US-ASTM 发布于 2023-08-01。
ASTM A276/A276M-23在国际标准分类中归属于: 77.140.20 不锈钢。
ASTM A276/A276M-23 不锈钢棒材和型材标准规范的最新版本是哪一版?
最新版本是 ASTM A276/A276M-24a 。
* 在 ASTM A276/A276M-23 发布之后有更新,请注意新发布标准的变化。
1.1 This specification covers hot-finished or cold-finished bars except bars for reforging (Note 1). It includes rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. The free-machining types (Note 2) for general corrosion resistance and high-temperature service are covered in a separate specification. NOTE 1—For bars for reforging, see Specification A314. NOTE 2—For free-machining stainless bars designed especially for optimum machinability, see Specification A582/A582M. NOTE 3—There are standards covering high nickel, chromium, austenitic corrosion, and heat-resisting alloy materials. These standards are under the jurisdiction of ASTM Subcommittee B02.07 and may be found in Annual Book of ASTM Standards, Vol. 02.04. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
钢材有线材、板材、型材和棒材,这些钢材轧制出来的形状不用用途也不一样,棒材就是截面是园的,粗细在20mm以上的钢材。棒材一般指的是棒料,是指产品断面形状为圆形、方形、扁形、棒材用途六角形、八角形等简单断面,并以直条交货的钢材(混凝土用钢筋除外),属于高碳钢,硬度比较大,一般用作机加工。...
适用性和局限性: 磁粉探伤适用于检测铁磁性材料表面和近表面尺寸很小、间隙极窄(如可检测出长0.1mm、宽为微米级的裂纹)目视难以看出的不连续性;也可对原材料、半成品、成品工件和在役的零部件检测,还可对板材、型材、管材、棒材、焊接件、铸钢件及锻钢件进行检测,可发现裂纹、夹杂、发纹、白点、折叠、冷隔和疏松等缺陷。 ...
1 评级图的制作GB/T1979-1980《结构钢低倍组织缺陷评级图》在执行20年来,对保证和提高我国钢铁产品的质量起到了巨大的作用,尤其是特钢企业的不锈钢、碳素钢、纯铁、合金结构钢的轧材、锻材、钢坯等均参照本标准进行内部试验及出厂产品的检验。...
b.磁粉检测可对原材料、半成品、成品工件和在役的零部件检测,还可对板材、型材、管材、棒材、焊接件、铸钢件及锻钢件进行检测。c.可发现裂纹、夹杂、发纹、白点、折叠、冷隔和疏松等缺陷。d.磁粉检测不能检测奥氏体不锈钢材料和用奥氏体不锈钢焊条焊接的焊缝,也不能检测铜、铝、镁、钛等非磁性材料。对于表面浅的划伤、埋藏较深的孔洞和与工件表面夹角小于20°的分层和折叠难以发现。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号