FprEN IEC 60118-0:2022由欧洲电工标准化委员会 IX-CENELEC 发布于 -,并于 - 实施,于 - 废止。
FprEN IEC 60118-0:2022在国际标准分类中归属于: 17.140.50 电声学。
IEC 60118-0:2022 gives recommendations for the measurement of the performance characteristics of air conduction hearing aids measured with an acoustic coupler or occluded ear simulator. This document is applicable to the measurement and evaluation of the electroacoustical characteristics of hearing aids, for example for type testing and manufacturer data sheets. This document is also applicable for the measurement of the performance characteristics of hearing aids for production, supply and delivery quality-assurance purposes. The measurement results obtained by the methods specified in this document will express the performance under conditions of the measurement and can deviate substantially from the performance of the hearing aid under actual conditions of use. This document primarily uses an acoustic coupler according to IEC 60318-5 which is only intended for loading a hearing aid with specified acoustic impedance and is not intended to reproduce the sound pressure in a person's ear. For measurements reflecting the output level in the normal human ear the occluded ear simulator according to IEC 60318-4 can be used. For extended high-frequency measurements and for deep insert hearing aids, the acoustic coupler according to IEC 60318-8 can be used. This document also covers measurement of hearing aids with non-acoustic inputs, such as wireless, inductive or electrical input. This document does not cover the measurement of hearing aids for simulated in situ working conditions, for which IEC 60118-8 can be applied. This document does not cover the measurement of hearing aids under typical user settings and using a speech-like signal, for which IEC 60118-15 can be applied. IEC 60118-0:2022 merges and updates the methods previously described in IEC 60118-0:2015 and IEC 60118-7:2005. It cancels and replaces the third edition of IEC 60118-0 published in 2015. This edition constitutes a technical revision. Measurements for quality control as described in IEC 60118-7:2005 can be found in Clause 10 of this document. This edition includes the following significant technical changes with respect to previous editions: a) the default use of an acoustic coupler according to IEC 60318-5, b) addition of the optional use of an occluded ear simulator according to IEC 60318-4, c) addition of the optional use of an acoustic coupler according to IEC 60318-8 (new standard based on IEC TS 62886) when information about the response above 8 kHz is needed, or the optional use of the acoustic coupler according to IEC 60318-8 for deep insert hearing aids, d) the addition of measurements of the performance of hearing aids for production, supply and delivery quality assurance purposes, e) corrected and updated measurement configuration and methods, adding the use of a sequential measurement as preferred configuration, f) updated and expanded measurement procedures for the non-acoustic inputs of the hearing aid.
129GB/T 25079-2010声学 建筑声学和室内声学中新测量方法的应用 MLS和SS方法2010-9-22011-4-130GB/T 25102.100-2010电声学 助听器 第0部分:电声特性的测量GB/T 6657-19862010-9-22011-4-131GB/T 25104-2010原油水含量的自动测定 射频法2010-9-22010-12-1...
系统与软件质量要求和评价(SQuaRE) 第12部分:数据质量模型2018-05-01GB/T 25000.24-2017系统与软件工程 系统与软件质量要求和评价(SQuaRE) 第24部分:数据质量测量2018-05-01GB/T 25074-2017太阳能级多晶硅GB/T 25074-20102018-05-01GB/T 25102.6-2017电声学 助听器 第6部分:助听器输入电路的特性2018...
5、无线电计量无线电计量是指无线电技术所用全部频率范围内从超低频到微波的一切电气特性的测量。主要有高频电压、功率、相位、脉冲、阻抗、噪声、失真等。无线电计量常用的计量器具主要包括:信号发生器、调制分析仪、音频分析仪、失真度测量仪、示波器、函数发生器、脑电图机、心电图机、扫频仪、心电监护仪等。...
通过电声方法测量 zeta电位执行ISO 13099-1标准《胶体系统 ——ζ电位测定方法 第1 部分:电声法和动电法;ISO 13099-3 胶体系统——ζ 电位测定方法 第 2部分:声学法》 在动态光散射 zeta 电位分析仪中只有经典理论。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号