BS ISO 20187-2:2022
充气游乐设备 用于永久安装的充气弹跳枕的附加安全要求

Inflatable play equipment - Additional safety requirements for inflatable bouncing pillows intended for permanent installation


标准号
BS ISO 20187-2:2022
发布
2022年
发布单位
英国标准学会
当前最新
BS ISO 20187-2:2022
 
 
适用范围
1   Scope This part of ISO 20187 specifies additional safety requirements for inflatable bouncing pillows intended for permanent installation. This part of ISO 20187 is applicable to inflatable play equipment intended for use by children fourteen years and under, both individually and collectively. This part of ISO 20187 specifies safety requirements for inflatable play equipment for which the primary activity is bouncing. It sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture and supply of inflatable play equipment. It specifies information to be supplied with the equipment. The requirements have been laid down bearing in mind the risk factor based on available data. This part of ISO 20187 specifies the requirements that will protect a child from hazards that he or she might be unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated. This part of ISO 20187 is not applicable to inflatables dealt with in ISO 20187‑1:2022, inflatable water-borne play and leisure equipment, domestic inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue, or other types of inflatable toys where the primary activity is not bouncing or sliding.

BS ISO 20187-2:2022相似标准


推荐

FTT单体燃烧测试仪(SBI)

• “气体控制箱”,安装在测试箱观察窗旁边,以便操作人员可以同时查看测试试样和丙烷流量(mg/s)。该装置包括3个流量水平控制器、警示灯和过载设备。• “气体分流器”包括质量流量控制器,用于控制丙烷气体流量。两个供气管中电磁阀和回火抑制器用于气体流向燃烧器自动安全操作。这些被放置在靠近测试框架地方,通过减少电磁阀和燃烧器之间管道长度来提高燃烧器响应时间。...

来自专家提示和建议—使用涡轮分子泵时常见错误以及如何避免

如果高真空侧尚未安装阀门,那么污染物将会扩散到接收器或设备中。使用干燥气体、氮气或无油空气对泵进行排气,既可以防止污染,还可以恰当地对前级泵进行充气。以一定速度使用排气阀、利用涡轮分子泵电子驱动器,可对泵进行安全放气。由于涡轮分子泵压缩比还取决于速度,因此最优初始排气速度应该为额定速度 50%,且应该以至少 20% 速度开始。除了出厂设置以外,现代电子技术允许放气速度具有一定灵活性。...

使用真空泵时最常见问题及如何避免 — 涡轮分子泵

在这种情况下,必须使用连接电缆将电子驱动器安装在远离辐射安全距离上。这同样适用于测量设备。 必须避免有源传感器,因为传感器电子元件同样会受到射线破坏。3.9.工艺适应性确保涡轮分子泵适合于工艺过程,这很重要。泵制造商详细建议和有关工艺过程与其特点准确信息是操作员所必需。目前这两方面都有待改进。...

六国装甲运输车和装甲汽车盘点

这种轮式装甲运输车基本武器配置为1挺7.62毫米口径或者12.7毫米口径机枪,出口型可根据订货方要求安装其它武器,包括导弹和火炮等。VAB型轮式装甲运输车可安装导航仪、空调系统、三防(防核武器、生物武器、化学武器)系统、附加装甲、夜视仪器、轮胎集中充气系统、通风和废气排除系统等。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号