EN 12067-2:2022
气体燃烧器和燃气装置用燃气/空气比率控制装置.第2部分:电子型

Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Part 2: Fuel/air ratio control/supervision of the electronic type


EN 12067-2:2022 发布历史

EN 13611:2019, Clause 1 is replaced by the following: This document specifies the safety, design, construction and performance requirements, and testing for electronic fuel/air ratio control systems (ERC), electronic fuel/air ratio supervision systems (ERS) and electronic fuel/air ratio trim systems (ERT) intended for use with burners and appliances burning gaseous or liquid fuels. It also describes the procedures for evaluating these requirements and specifies information necessary for installation and use. This document is applicable to: - closed loop fuel/air ratio control systems, see 3.101; - fuel/air ratio supervision systems, see 3.102; - closed loop fuel/air ratio trim systems, see 3.103; and does not differentiate into classification by heat input. NOTE The documents for burners, appliances or processes which use ERC, ERS or ERT can override the requirements of this document.

EN 12067-2:2022由欧洲标准化委员会 IX-CEN 发布于 2022-11-16,并于 2023-02-28 实施,于 2025-11-30 废止。

EN 12067-2:2022在国际标准分类中归属于: 23.060.40 压力调节器。

EN 12067-2:2022的历代版本如下:

  • 2022年 EN 12067-2:2022 气体燃烧器和燃气装置用燃气/空气比率控制装置.第2部分:电子型
  • 2004年 EN 12067-2:2004 气体燃烧器和燃气装置用燃气/空气比率控制装置.第2部分:电子型

 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 EN 12067-2:2022 前三页,或者稍后再访问。

点击下载后,生成下载文件时间比较长,请耐心等待......

 



标准号
EN 12067-2:2022
发布
2022年
发布单位
欧洲标准化委员会
当前最新
EN 12067-2:2022
 
 
适用范围
EN 13611:2019, Clause 1 is replaced by the following: This document specifies the safety, design, construction and performance requirements, and testing for electronic fuel/air ratio control systems (ERC), electronic fuel/air ratio supervision systems (ERS) and electronic fuel/air ratio trim systems (ERT) intended for use with burners and appliances burning gaseous or liquid fuels. It also describes the procedures for evaluating these requirements and specifies information necessary for installation and use. This document is applicable to: - closed loop fuel/air ratio control systems, see 3.101; - fuel/air ratio supervision systems, see 3.102; - closed loop fuel/air ratio trim systems, see 3.103; and does not differentiate into classification by heat input. NOTE The documents for burners, appliances or processes which use ERC, ERS or ERT can override the requirements of this document.

EN 12067-2:2022相似标准


推荐

颇尔电力 | 燃机电厂天然气前置模块进气过滤装置新应用

优势SepraSol™增强滤材用于大流量、高性能的6英寸直径过滤器,可经济有效地处理需对固体液体进行高度保护的各种应用中的大型气流,包括:保护压缩机涡轮机清除废气流中的油雾、水杂质颗粒产物清除胺法脱硫脱水装置进料气体中的液体气溶胶,避免起泡问题最大程度减少气体净化工艺装置下游污染物保护燃烧器燃气喷嘴近期,可适配西门子燃气轮机的颇尔进气过滤器SepraSol™增强液体/气体聚结器,经过国电环境保护研究院有限公司...

FTT单体燃烧测试仪(SBI)

• “气体控制箱”,安装在测试箱观察窗旁边,以便操作人员可以同时查看测试试样丙烷流量(mg/s)。该装置包括3个流量水平控制器、警示灯过载设备。• “气体分流器”包括质量流量控制器,用于控制丙烷气体流量。两个供气管中的电磁阀回火抑制器用于气体流向燃烧器的自动安全操作。这些被放置在靠近测试框架的地方,通过减少电磁阀燃烧器之间的管道长度来提高燃烧器的响应时间。...

常用分析仪器维护精讲

燃气运行路线:燃气气源出口→气体控制燃气入口→气体控制燃气出口→主机后面燃气入口→雾化器气体入口。助燃气运行路线:助燃气气源出口→气体控制箱助燃气入口→气体控制箱助燃气出口→主机后面助燃气入口→雾化器气体入口。废液排放管道接到仪器外面,不能直接插入实验室废水系统。要求:各气路连接紧密不漏气,不得接反。2空气压缩机的安装首先检查压缩机是否完好。...


谁引用了EN 12067-2:2022 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号