BS 851188-2:2019+A1:2021

Flood resistance products - Perimeter barrier systems. Specification

BS 851188-2:2019+A1:2021 发布历史

1   Scope This British Standard specifies requirements for the designation, testing, factory production control , installation manual, deployment instructions, user manual and marking for different types and configurations of flood resistance products . This British Standard is applicable to flood resistance products intended for either temporary installation or to be demountable, for use away from buildings but where they could be sealed against structures or buildings at section ends, in the UK or locations with similar exposures, i.e. where there is a temperate climate. This British Standard specifies the method of testing and an allowable leakage rate. NOTE 1 The test conditions given in Annex A represent typical conditions that can be experienced during a flood. This includes testing the flood resistance product on a concrete base for leakage and structural failure under static water levels, random waves up to 0.1 m high and parallel currents up to 1.0 m/s. NOTE 2 This British Standard does not cover testing with contaminated or saline water; however, product manufacturers are required to provide information about the performance of their products in these conditions (see Annex B). NOTE 3 Flood resistance products that conform to this British Standard might not be suitable for all ...

BS 851188-2:2019+A1:2021由英国标准学会 GB-BSI 发布于 2021-11-30，并于 2021-11-30 实施。

BS 851188-2:2019+A1:2021在国际标准分类中归属于: 91.120.99 有关建筑物防护的其他标准。

BS 851188-2:2019+A1:2021的历代版本如下：

• 2021年 BS 851188-2:2019+A1:2021

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 BS 851188-2:2019+A1:2021 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

BS 851188-2:2019+A1:2021

发布

2021年

发布单位

英国标准学会

当前最新

BS 851188-2:2019+A1:2021

 

 

适用范围

1   Scope This British Standard specifies requirements for the designation, testing, factory production control , installation manual, deployment instructions, user manual and marking for different types and configurations of flood resistance products . This British Standard is applicable to flood resistance products intended for either temporary installation or to be demountable, for use away from buildings but where they could be sealed against structures or buildings at section ends, in the UK or locations with similar exposures, i.e. where there is a temperate climate. This British Standard specifies the method of testing and an allowable leakage rate. NOTE 1 The test conditions given in Annex A represent typical conditions that can be experienced during a flood. This includes testing the flood resistance product on a concrete base for leakage and structural failure under static water levels, random waves up to 0.1 m high and parallel currents up to 1.0 m/s. NOTE 2 This British Standard does not cover testing with contaminated or saline water; however, product manufacturers are required to provide information about the performance of their products in these conditions (see Annex B). NOTE 3 Flood resistance products that conform to this British Standard might not be suitable for all ...

BS 851188-2:2019+A1:2021相似标准