GSO ISO 14405-3:2021由GSO 发布于 2021-07-01。
GSO ISO 14405-3:2021在国际标准分类中归属于: 17.040.10 极限和配合。
GSO ISO 14405-3:2021 产品几何规范 (GPS) 尺寸公差 第3部分:角度尺寸的最新版本是哪一版?
最新版本是 GSO ISO 14405-3:2021 。
This part of ISO 14405 establishes the default specification operator for angular size and defines a number of special specification operators for features of angular size: cone (truncated, i.e. frustum, or not), wedge (truncated or not), two opposite straight lines (intersection of a wedge/truncated wedge and a plane perpendicular to the intersection straight line of the two planes of the wedge/truncated wedge, intersection of a cone/frustum and a plane containing the axis of revolution of the cone/frustum). See Figure 1 and Figure 2. This part of ISO 14405 also defines the specification modifiers and the drawing indications for these angular sizes. This part of ISO 14405 covers the following angular sizes: — local angular size: — angular size between two lines; — portion angular size; — global angular size: — direct global angular size: — least squares angular size; — minimax angular size; — rank order angular size/indirect global angular size: — maximum angular size; — minimum angular size; — average angular size; — range of angular sizes; — mid-range angular size; — median angular size; — standard deviation of angular size. This part of ISO 14405 defines the meaning of tolerances of angular sizes indicated as — + and/or - limit deviations, e.g. 0°/-0,5°, or — indicated with upper limit of size (ULS) and/or lower limit of size (LLS), e.g. 35° max. or 15° min., 34°/36°, — with or without modifiers. This part of ISO 14405 provides a set of tools to express several types of angular size characteristics. It does not give any information on the relationship between a function or a use and an angular size characteristic.
三维光学检测仪可地检测各种复杂精密零部件的轮廓和表面形状尺寸、角度及位置,全自动地进行微观检测与质量控制;还可自动抓边、自动聚焦的功能使得程度减少了人为误差。对于三维测量仪的类别:1.三维光学影像测量仪:三维影像测量仪,用于测量三维几何尺寸和形位公差的高精度测量仪器。2.三维激光扫描测量仪:三维激光扫描技术是上近期发展的一项高新技术。...
需要说明的是,表中Ra采用第1系列值,而旧的国标Ra的极限值为第2系列值,换算时会遇到数值上靠和下靠的问题。我们在表中表值采用上靠,因为这有利于提高产品质量,个别值采用下靠。旧国标的公差等级与表面粗糙度对应的表的内容和形式都比较复杂,对同一公差等级同一尺寸分段同一基本尺寸,孔与轴的表面粗糙度值不相同,不同配合种类数值也不相同,这是由于旧的公差与配合标准(GB159—59)的公差数值与上述因素有关。...
需要说明的是,表中Ra采用第1系列值,而旧的国标Ra的极限值为第2系列值,换算时会遇到数值上靠和下靠的问题。我们在表中表值采用上靠,因为这有利于提高产品质量,个别值采用下靠。旧国标的公差等级与表面粗糙度对应的表的内容和形式都比较复杂,对同一公差等级同一尺寸分段同一基本尺寸,孔与轴的表面粗糙度值不相同,不同配合种类数值也不相同,这是由于旧的公差与配合标准(GB159—59)的公差数值与上述因素有关。...
需要说明的是,表中Ra采用第1系列值,而旧的国标Ra的极限值为第2系列值,换算时会遇到数值上靠和下靠的问题。我们在表中表值采用上靠,因为这有利于提高产品质量,个别值采用下靠。旧国标的公差等级与表面粗糙度对应的表的内容和形式都比较复杂,对同一公差等级同一尺寸分段同一基本尺寸,孔与轴的表面粗糙度值不相同,不同配合种类数值也不相同,这是由于旧的公差与配合标准(GB159—59)的公差数值与上述因素有关。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号