GSO IEC 60984:2016
带电作业 电气绝缘套管

Live working - Electrical insulating sleeves


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 GSO IEC 60984:2016 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
GSO IEC 60984:2016
发布
2016年
发布单位
GSO
当前最新
GSO IEC 60984:2016
 
 
适用范围
IEC 60984:2014 is applicable to electrical insulating sleeves for the protection of workers from accidental contact with live electrical conductors, apparatus or circuits. The products designed and manufactured according to this standard contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use. Unless otherwise stated, in this standard the term "sleeve" is used for "electrical insulating sleeve". This second edition cancels and replaces the first edition, published in 1990 and its Amendment 1 published in 2002. It constitutes a technical revision which includes the following major changes: - removal of the requirement for an area to mark the date of inspection; - only the straight mounting method with water electrodes is specified for the dielectric type test; - the d.c. electric tests are no longer included in the normative part of the document, but a new informative Annex E is added; - preparation of the elements of evaluation of defects, and general application of IEC 61318:2007; - in the new normative Annex F, updating of the characteristics of the liquid specified for tests on sleeves of category H, according to the latest edition of ISO 1817; - introduction of a new normative Annex G on classification of defects; - introduction of a new informative Annex H on the rationale for the classification of defects; - and for periodic electrical retesting, recommended voltage limit of the dielectric test methods to 10 kV except in case of the test method with water electrodes and straight mounting.

GSO IEC 60984:2016相似标准


推荐

仪表保养和检修时,这些顺手的工具你应该知道(一)

使用注意事项:使用前,使检查钢丝钳绝缘是否良好,以免带电作业时造成触电事故。在带电剪切导线时,不得用刀口同时剪切不同电位的两根线(如相线与零线、相线与相线等),以免发生短路事故。 3.尖嘴钳 尖嘴钳的头部尖细,适用于狭小的工作空间或带电操作低压电气设备。尖嘴钳也可用来剪断细小的金属丝。可用于仪表导线接头制作或维修,使用灵活方便。...

做好这三点,您的无线高压核相仪更安全

2、标准配置绝缘杆3米,对应电压等级为 ≤ 220kV。如测量线路电压高于220KV时,请使用长度大于3米的绝缘杆。 3、核相操作时,手持位置不要超过绝缘杆手柄位置。...

仪表保养和检修时,这些顺手的工具你应该知道(二)

4.剥线钳 剥线钳是用来剥削小直径导线绝缘层的专用工具,其外形如图所示。它的手柄是绝缘的,耐压为500V。常用的有手动和自动两种。 自动:根据导线内部金属丝尺寸自适应,从而不伤内部导线;而且剥线长度可调节。 5.斜口钳 斜口钳也是检修常用的钳子之一,其头部扁斜,又名扁嘴钳,主要用于剪切导线,元器件多余的引线,还常用来代替剪刀剪切绝缘套管、尼龙扎线卡等。其柄部有铁柄和绝缘管套。...

辨别试验变压器真假的方法有哪些?

高压试验变压器是发电厂、供电局及科研单位等广大用户的用来做交流耐压试验的基本试验设备,通过了国家质量监督局的标准,用于对各种电气产品、电器元件、绝缘材料等进行规定电压下的绝缘强度试验,考核产品的绝缘水平,发现被试品的绝缘缺陷,衡量过电压的能力。目前市场上决定试验变压器质量好坏主要由硅铁片、高压套管绝缘材料、制造工艺、及控制部分的电器元件。其中以硅铁片、高压套管绝缘材料、电器元为重要。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号