GSO ASTM D977:2021
乳化沥青标准规范

Standard Specification for Emulsified Asphalt


GSO ASTM D977:2021 发布历史

GSO ASTM D977:2021由GSO 发布于 2021-07-01。

GSO ASTM D977:2021在国际标准分类中归属于: 91.100.50 粘合料、密封材料。

GSO ASTM D977:2021 乳化沥青标准规范的最新版本是哪一版?

最新版本是 GSO ASTM D977:2021

GSO ASTM D977:2021的历代版本如下:

 

This specification covers the requirements for thirteen grades of emulsified asphalt for use in pavement construction in the manner designated. The emulsified asphalts shall be homogeneous after thorough mixing and shall be tested within 14 days of delivery. Asphalts separated by freezing shall no longer be tested. Materials shall be appropriately sampled and tested, and shall conform accordingly to the following physical requirements: viscosity; storage stability; demulsibility; coating ability and water resistance; cement mixing; residue by distillation; oil distillate; ductility; solubility in trichloroethylene; and behavior during sieve, penetration, and float tests.

标准号
GSO ASTM D977:2021
发布
2021年
发布单位
GSO
当前最新
GSO ASTM D977:2021
 
 

GSO ASTM D977:2021相似标准


推荐

卤素水分测定仪如何控制乳化沥青的固含量

乳化沥青标准中,蒸发残留物是关键控制的指标,也是工程监理重点监测的指标之一。在乳化沥青道路标准中称为蒸发残留物,防水标准中称为固含量,工程实际中都采用固含量这个说法,我们采用固含量这种叫法。这篇文章就要说说乳化沥青固含量在乳化沥青设备工作中如何监测的。 首先看下乳化沥青固含量的测定如何测定的。...

乳化沥青设备的乳化沥青设备的组成

乳化沥青设备包括:一、乳化沥青胶体磨JM-18,JM-20,JM-8。二、乳化沥青实验机JM-5循环式,JM-30模拟生产型,JM-30A自动配比型乳化沥青实验机。JM-30模拟生产型乳化沥青实验机产能:30L功率:10KW占地面积:2×1.8×1.7(M)1.整机:自动温控,人工加料及配比生产。2.乳液配料系统:自动温控、人工称量配料,配置定时搅拌器和余料放空功能。...

什么是负荷轮碾压试验仪?

  执行标准:符合JTJ050-2000《公路工程沥青沥青混合料试验规程》中“乳化沥青稀浆封层混合料碾压试验”(T0755-2000)标准 产品特点:本仪器适用于测定乳化沥青稀头封层混合料中是否有过量沥青,控制沥青用量的上限,与湿轮磨耗试验一起确定乳化沥青稀浆封层混合料的最佳用量。...

乳化沥青稀浆封层负荷轮碾压试验仪的概述

  乳化沥青稀浆封层负荷轮碾压试验仪:用于测定乳化沥青稀浆封层混合料中是否有过量沥青的试验,控制沥青用量的上限,与湿轮磨耗试验仪器确定乳化沥青稀浆封层混合料的最佳沥青用量,仪器符合“JTJ052-2000”标准中“0755-2000”的试验要求。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号