EN IEC 60974-8:2021
弧焊设备 第8部分:焊接和等离子切割系统的气体控制台

Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems


EN IEC 60974-8:2021 发布历史

EN IEC 60974-8:2021由欧洲电工标准化委员会 IX-CENELEC 发布于 2021-11-26,并于 2021-12-15 (7) 实施,于 2024-09-15 (7) 废止。

EN IEC 60974-8:2021在国际标准分类中归属于: 25.160 焊接、钎焊和低温焊。

EN IEC 60974-8:2021的历代版本如下:

  • 2021年 EN IEC 60974-8:2021 弧焊设备 第8部分:焊接和等离子切割系统的气体控制台

 

IEC 60974-8:2021 is available as IEC 60974-8:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60974-8:2021 specifies safety and performance requirements for gas consoles intended to be used with combustible gases or oxygen. These gas consoles are designed to supply gases for use in arc welding, plasma cutting, gouging and allied processes in non-explosive atmospheres. The gas console can be external or internal to the power source enclosure. In the latter case, the power source shall meet the requirements of both IEC 60974-1 and this document. This third edition cancels and replaces the second edition, published in 2009. This edition constitutes a technical revision. The significant technical changes with respect to the previous edition are the following: - changes induced by the publication of IEC 60974-1:2017; - requirements for the rating plate as in IEC 60974-1:2017, Clause 15; - requirements for the instructions in 13.2. This part of IEC 60974 is to be used in conjunction with IEC 60974-1.

标准号
EN IEC 60974-8:2021
发布
2021年
发布单位
欧洲电工标准化委员会
当前最新
EN IEC 60974-8:2021
 
 

EN IEC 60974-8:2021相似标准


推荐

如果这三个问题没把你问蒙圈,证明你是有一定焊接基础

材料科学与工程点击上方「材料科学与工程」快速关注材料类综合、全面、专业微信平台如何根据材料选择焊接设备?答:首先根据件金属来选择,一般黑色金属可选用、埋、二氧化碳气保、手工电弧、以及氩弧焊点焊等。...

焊接技术回顾——世界焊接发展200年

1949年:第一台使用电阻焊工艺制造结构FORD牌汽车下线。1950年:美国人Muller,GibsonAnderson三人获得第一个熔化极气体保护焊过度专利。1950年:德国F.Buhorn发现等离子电弧。大约1950年:在前苏联首次把电渣用于生产。1953年:美国Hunt发明冷压。1953年:前苏联柳波夫斯基、日本关口等人发明CO2气体保护电弧。...

焊接材料术语、热切割术语、焊接工艺装备辅助器具术

2.气割利用气体火焰热能将工件切割处预热到一定温度后,喷出高速切割氧流,使其燃烧并放出热量实现切割方法。3.电弧切割利用电弧热能熔化切割金属,实现切割方法。4.等离子切割利用等离子热能实现切割方法。5.激光切割利用激光束热能实现切割方法。6.火焰气刨利用气割原理在金属表面上加工沟槽方法。...

【材料课堂】各种焊接技术知识汇总

此外,还有适用于铜及铜合金焊接熔入型等离子,可用于厚板深熔焊或薄板高速以及堆焊熔化极等离子,可解决铝合金等离子交流(变极性)等离子等工艺方法。等离子主要工艺参数有焊接电流、焊接速度、保护气流量、离子气流量、焊枪喷嘴结构与孔径等。  等离子切割:利用等离子高温高速流使切口金属局部熔化以致蒸发,并借助高速气流或水流将熔化材料吹离基体形成切口切割方法。  ...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号