GSO IEC 60652:2023
架空线路结构 负载测试

Overhead line structures - Loading tests


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 GSO IEC 60652:2023 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
GSO IEC 60652:2023
发布
2023年
发布单位
GSO
当前最新
GSO IEC 60652:2023
 
 
适用范围
IEC 60652:2021 is available as IEC 60652:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60652:2021 specifies the methods and procedures of testing supports for overhead lines. It applies to the testing of supports and structures of overhead lines. There is no restriction on the type of material used in the fabrication of the supports which may include, but not be limited to, metallic alloys, concrete, timber, laminated wood and composite materials. If required by the client, this document can also be applied to the testing of telecommunication supports, railway/tramway overhead electrification supports, electrical substation gantries, street lighting columns, wind turbine towers, ski-lift supports, etc. Tests on reduced scale models of supports are not covered by this document. This third edition cancels and replaces the second edition published in 2002. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Title modified; b) Added reference to CIGRE Brochure 399; c) In Clause 7, added test limitation for wind speed and direction during testing; d) In paragraph 10.5, added load increments for destruction tests; e) In paragraph 10.7, added a requirement for an agreement between client and testing station when testing supports made of creep-sensitive materials; f) In Clause 17, added requirements for sampling procedure to be provided in the test report.

GSO IEC 60652:2023相似标准


推荐

线路参数测试仪的概述

MS-110B的线路参数测试仪,能够准确测量各种高压输电线线路(架空、电缆、架空电缆混合、 同杆多回架设的工频参数(正序电容、正序阻抗、零序电容、零序阻抗、互感 和耦合电容等),完全满足《110 千伏及以上送变电基本建设工程启动验收规 程 》、 DL/T559-94 《 220-500kV 电 网 继 电 保 护 装 置 运 行 整 定 规 程 》、 《GB50150-2006》的规定要求。...

输电线路故障距离测试仪的主要用途和工作原理

一、用途输电线路故障距离测试仪是用于架空输电线路发生*性接地(短路)或断路(开路)时,测量故障点到测量点(变压器)的距离。该仪器适用于35kV及以上各电压等级的架空输电线,当发生*性单相接地或断线故障时,只要在变电站内对故障线路进行测试,电缆故障测试仪就可准确地测出故障距离,确定故障杆塔,便于抢修人员快速查找故障,缩短抢修时间。输电线路故障距离测试仪必须在线路停电的基础上才能使用。...

线路参数测试仪的应用范围

   MS-110B线路参数测试仪,可以单机输出三相异频抗干扰测试信号,测量35~500 kV高压输电线线路(架空、电缆、架空电缆混合、同杆多回架设)的工频参数。  ...

异频线路参数测试仪介绍

仪器采用一体化结构,内置变频电源模块,可变频调压输出电源。采用数字滤波技术,避开了工频电场对测试的干扰,从根本上解决了强电场干扰下准确测量的难题。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号