GSO ISO 4589-3:2013
塑料材料 使用氧指数测定燃烧行为 第3部分：高温评估

Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 GSO ISO 4589-3:2013 前三页，或者稍后再访问。

您也可以尝试购买此标准，
点击右侧 “立即购买” 按钮开始采购（由第三方提供）。

标准号

GSO ISO 4589-3:2013

发布

2013年

发布单位

GSO

当前最新

GSO ISO 4589-3:2013

 

 

适用范围

This part of IS0 4589 specifies methods for determining the minimum concentration of oxygen, in a mixture with nitrogen, that will support combustion of small vertical test specimens under specified test conditions over a range of temperatures typically between 25 “C and 150 “C. The results are defined as oxygen index values at the test temperature, which is typical of the practical temperature that a plastic material may experience in an overheated service situation. Methods are provided for testing materials that are self-supporting at the test temperature in the form of vertical bars or sheet up to IO,5 mm thick. These methods are suitable for solid, laminated or cellular materials characterized by an apparent density greater than 100 kg/m3. The methods may also be applicable to some cellular materials having an apparent density of less than 100 kg/m3. A method is provided for testing flexible sheet or film materials while supported vertically. This part of IS0 4589 also includes a method (see annex A) for determining the temperature at which the oxygen index of small vertical test specimens in air is 20,9 under specified test conditions. The result is defined as the flammability temperature (FT) and the method is limited to the determination of results less than 400 “C. The method is not applicable to materials having an oxygen index of < 20,9 when measured at 23 “C. Results obtained in accordance with this part of IS0 4589 should not be used to describe or appraise the fire hazard presented by a particular material or shape under actual fire conditions, unless used as one element of a fire risk assessment which takes into account all of the factors which are pertinent to the assessment of the fire hazard of a particular application for the material. NOTES 1 It may not be possible to apply these methods satisfactorily to materials that exhibit high levels of shrinkage when heated, e.g. highly oriented thin film. 2 For assessing the flame propagation properties of cellular materials of density < 100 kg/m3, attention is drawn to the method of IS0 3582:1978, Cellular plastic and cellular rubber materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame.

GSO ISO 4589-3:2013相似标准

推荐