DIN EN 12034:1996
胶粘带.粘合带卷长度测量

Self adhesive tapes - Measurement of the length of a roll of adhesive tape; German version EN 12034:1996


DIN EN 12034:1996


标准号
DIN EN 12034:1996
发布
1996年
发布单位
德国标准化学会
当前最新
DIN EN 12034:1996
 
 
适用范围
The document specifies a method to measure the length of adhesive tape on a roll. For non extensible adhesive tapes the length measured by this method shall be the same as the length after unrolling. For extensible adhesive tapes the length after unrolling shall be greater if the adhesive tape is stretched irreversibly by unrolling. It is also possible for an extensible adhesive tape to measure less after unrolling if stress built manufacture recovers after unrolling. This is important for all adhesive tapes with elongation at break of 80 % or greater.

DIN EN 12034:1996相似标准


推荐

电子拉力试验机在使用时的一些注意事项

电子拉力试验机的应用:电子拉力试验机适用于塑料薄膜、复合材料、软质包装材料、塑料软管、胶粘剂、胶粘带、不干胶、医用贴剂、保护膜、离型纸、组合盖、金属箔、隔膜、背板材料、无纺布、橡胶、纸张纤维等产品的拉伸、剥离、变形、撕裂、热封、粘合、穿刺力、开启力、低速解力、拨开力等性能测试。...

胶粘带剥离力测试标准

4.4.2为了保证在试验时胶粘带与被粘片、膜材料保持180°分离角度,用胶粘带将试片顺长度方向的两侧粘贴在金属校直板上。5试验条件 5.1试验室温度为23±2℃;相对湿度为65±5%。 5.2胶粘带、被粘材料应在5.1条件下放置2h以上。6试验步骤 6.1用精度不低于0.05mm的量具测量胶粘带宽度。...

不干胶胶带等粘性物品的剥离测试方法

4.4.2为了保证在试验时胶粘带与被粘片、膜材料保持180°分离角度,用胶粘带将试片顺长度方向的两侧粘贴在金属校直板上。5试验条件 5.1试验室温度为23±2℃;相对湿度为65±5%。 5.2胶粘带、被粘材料应在5.1条件下放置2h以上。6试验步骤 6.1用精度不低于0.05mm的量具测量胶粘带宽度。...

不干胶胶带剥离测试方法

4.4.2为了保证在试验时胶粘带与被粘片、膜材料保持180°分离角度,用胶粘带将试片顺长度方向的两侧粘贴在金属校直板上。5试验条件 5.1试验室温度为23±2℃;相对湿度为65±5%。 5.2胶粘带、被粘材料应在5.1条件下放置2h以上。6试验步骤 6.1用精度不低于0.05mm的量具测量胶粘带宽度。 ...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号