BS 3G 100-2.3.15:1978
飞机设备一般要求规范.第2部分:各种设备.第3节:环境条件.第15小节:温度变化

Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Change of temperature


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 BS 3G 100-2.3.15:1978 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
BS 3G 100-2.3.15:1978
发布
1978年
发布单位
英国标准学会
当前最新
BS 3G 100-2.3.15:1978
 
 
适用范围
Tins Intel national Standard specifics tests to evaluate the effects of temperature variations on components or equip-ment used in an craft. The tests have limited application and should only be specified in the relevant equipment specifi-cation when the thermal effects due to a change of tem-perature are significant to the operation of the equipment. The tests will enable equipment manufacturers to demonstrate that then equipment — when exposed to changes of temperatuie — will continue to function, and/or suivive. Two categories of test are described : 1) Temperature variations generally applicable to equipment likely to be subjected to gradual changes in atmospheric temperature, and 2) Thermal shock - generally applicable to equipment likely to be subjected to rapid or instantaneous changes in atmosphenic temperature. The tests are not suitable for equipment installed in locations wheie the heat transfer rate is greatly increased by high velocity ot tutbulent an movement (for example external to the aircraft or in intake or supercharger ducting), where the temperatuie change affects only certain paits or surfaces of the equipment (for example radomes, windscreens, etc.), nor are they applicable to equipment which is subject to thermal shock by contact with a hot fluid (for example hydraulic components). For such equip-ment the lelevant equipment specification shall detail the appiopriate test to be conducted.

BS 3G 100-2.3.15:1978相似标准


推荐

试验设备标准及检定方法(二)

3、几种常用的不同试验方法所需设备的检定方法标准 试验方法标准检定方法标准代号名称代号名称GB2423.1电工电子产品环境2部分试验方法试验A:低温GB5170.2电工电子产品环境试验设备基本参数检定方法温度试验设备GB2423.1电工电子产品环境2部分试验方法试验B:高温GB2423.22电工电子产品基本环境试验规程试验N:温度变化试验方法GB2423.3电工电子产品环境试验2部分试验方法试验...

冷热温度冲击试验箱试验目的及试验条件

c.低温区的要求,应符合GJB150.4-86《设备环境试验方法低温试验》的3章各条所规定的要求。d.提供高温试验部分和低温试验部分,应分别符合GJB150.3-86和GJB150.4-86的3章各条所规定的要求。e.试验箱的容积应保证在试验样品放入候补超过试验温度保持时间的10%就能使试验箱(室)温度达到GJB150.1-89中3.2条规定的试验条件容差范围之内。...

高低温冲击试验箱的目的及试验要求

4、对冷热冲击箱的要求:a.采用高温箱和低温箱进行冷热冲击试验,以提供试验样品经受周围空气温度急剧发生变化的环境温度。b.高温区的要求,应符合GJB150.3-86《军用设备环境试验方法高温试验》的3章各条所规定的要求。c.低温区的要求,应符合GJB150.4-86《军用设备环境试验方法低温试验》的3章各条所规定的要求。...

冷热温度冲击试验箱试验目的及要求

c.低温区的要求,应符合GJB150.4-86《军用设备环境试验方法低温试验》的3章各条所规定的要求。d.提供高温试验部分和低温试验部分,应分别符合GJB150.3-86和GJB150.4-86的3章各条所规定的要求。e.试验箱的容积应保证在试验样品放入候补超过试验温度保持时间的10%就能使上海廷翌仪器试验箱(室)温度达到GJB150.1-89中3.2条规定的试验条件容差范围之内。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号