IEC 61146-3-1997
摄像机(PAL/SECAN/NTSC) 测量方法 第3部分:非广播用摄像记录器
Video cameras (PAL/SECAM/NTSC) - Methods of measurements - Part 3: Non-broadcast camera-recorders
IEC 61146-3-1997 发布历史
The measuring methods described in this part of IEC 61146 concern the assessment of the performance of non-broadcast camera-recorders (NTSC/PAL/SECAM). The appropriate measurements are to be applied according to whether the camera-recorder has a tube or semi-conductor camera. In the case of a camera-recorder without playback capability, the details of the separate player used for the measurements shall be stated. In this standard, the characteristics apply to the camera-recorder as a complete entity. This standard defines test patterns and measurement conditions so as to enable the comparison of the results of measurements. The standard does not specify limiting values for the various quantities for acceptable performances, since that is not the object of this standard. The methods of measurement are designed to enable the assessment of the performance of the camera-recorder by using the lens for input and any available output from the device (e.g. separate luminance and chrominance signals or composite signal output).
IEC 61146-3-1997由国际电工委员会 IX-IEC 发布于 1997-07。
IEC 61146-3-1997 在中国标准分类中归属于: M73 视频、脉冲系统设备，在国际标准分类中归属于: 33.160.40 视频系统。
IEC 61146-3-1997的历代版本如下：
- 1997年07月 IEC 61146-3-1997 摄像机(PAL/SECAN/NTSC) 测量方法 第3部分:非广播用摄像记录器
- 标准号
- IEC 61146-3-1997
- 发布日期
- 1997年07月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- M73
- 国际标准分类号
- 33.160.40
- 发布单位
- 国际电工委员会
- 被代替标准
- IEC 100B/52/FDIS-1997
- 适用范围
- The measuring methods described in this part of IEC 61146 concern the assessment of the performance of non-broadcast camera-recorders (NTSC/PAL/SECAM). The appropriate measurements are to be applied according to whether the camera-recorder has a tube or semi-conductor camera. In the case of a camera-recorder without playback capability, the details of the separate player used for the measurements shall be stated. In this standard, the characteristics apply to the camera-recorder as a complete entity. This standard defines test patterns and measurement conditions so as to enable the comparison of the results of measurements. The standard does not specify limiting values for the various quantities for acceptable performances, since that is not the object of this standard. The methods of measurement are designed to enable the assessment of the performance of the camera-recorder by using the lens for input and any available output from the device (e.g. separate luminance and chrominance signals or composite signal output).