IEC 61674-1997
医用电气设备 用于X射线诊断成像中带电离室和/或半导体探测器的剂量仪

Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging

IEC 61674-1997 发布历史

This International Standard specifies the performance and some related constructional requirements of DIAGNOSTIC DOSIMETERS, as defined in 3.1, intended for the measurement of AIR KERMA, AIR KERMA LENGTH or AIR KERMA RATE, in photon radiation fields used in RADIOGRAPHY, including MAMMOGRAPHY, RADIOSCOPY and COMPUTED TOMOGRAPHY (CT), for X-rays with generating potentials not greater than 150 kV. This International Standard is applicable to the performance of dosimeters with IONIZATION CHAMBERS and/or sEMI-CONDUCTOR DETECTORS as used in X-ray diagnostic imaging.

IEC 61674-1997由国际电工委员会 IX-IEC 发布于 1997-10。

IEC 61674-1997 在中国标准分类中归属于: C43 医用射线设备，在国际标准分类中归属于: 17.240 辐射测量。

IEC 61674-1997的历代版本如下：

• 1997年10月 IEC 61674-1997 医用电气设备 用于X射线诊断成像中带电离室和/或半导体探测器的剂量仪
• 2012年11月 IEC 61674-2012 医用电气设备.用X射线诊断成像中带电离室和/或半导体探测器的剂量仪

标准号

IEC 61674-1997

发布日期

1997年10月

实施日期

废止日期

无

中国标准分类号

C43

国际标准分类号

17.240

发布单位

IX-IEC

代替标准

IEC 61674-2012

适用范围

This International Standard specifies the performance and some related constructional requirements of DIAGNOSTIC DOSIMETERS, as defined in 3.1, intended for the measurement of AIR KERMA, AIR KERMA LENGTH or AIR KERMA RATE, in photon radiation fields used in RADIOGRAPHY, including MAMMOGRAPHY, RADIOSCOPY and COMPUTED TOMOGRAPHY (CT), for X-rays with generating potentials not greater than 150 kV. This International Standard is applicable to the performance of dosimeters with IONIZATION CHAMBERS and/or sEMI-CONDUCTOR DETECTORS as used in X-ray diagnostic imaging.

谁引用了IEC 61674-1997 更多引用