IEC 60432-1:1999由国际电工委员会 IX-IEC 发布于 1999-08，并于 2005-05-16 实施。
IEC 60432-1:1999 在中国标准分类中归属于: K71 电光源产品，在国际标准分类中归属于: 29.140.20 白炽灯。
本标准有等同采用的 中文版 GB 14196.1-2002 家庭和类似场合普通照明用钨丝灯安全要求
International Standard IEC 60432-1 specifies the safety and interchangeability requirements of tungsten filament incandescent lamps for general lighting service having: - rated wattage up to and including 200 W; - rated voltage of 50 V to 250 V inclusive; - bulbs of the A, B, C, G, M, P, PS, PAR or R shapes, or other bulb shapes where the lamps are intended to serve the same purpose as lamps with the foregoing bulb shapes; - bulbs with all kinds of finishes; - caps B15d, B22d, E12, E14, E17, E26, E26d, E26/50×39, E27 or E27/51×39. As far as is reasonably practicable, this standard is also applicable to lamps with bulbs and caps other than those mentioned above, but which serve the same purpose. This standard specifies the method a manufacturer should use to show that his product conforms to this standard on the basis of whole production appraisal in association with his test records on finished products. This method can also be applied for certification purposes. Details of a batch test procedure which can be used to make limited assessment of batches are also given. This standard is concerned with safety criteria only and does not take into account the performance of tungsten filament lamps with respect to luminous flux, life or power consumption characteristics. Readers should refer to IEC 60064 for such characteristics with respect to types normally used for general lighting service. note: * See IEC 60887 for description of the letter symbols. Associated traditional names are: - Pear shape = A, PS - Mushroom = M - Candle = B, C (in North America) - Round bulb = P - Globular = G - Reflector = R - Parabolic reflector = PAR ** There are two variations of E26 caps which are not fully compatible. In this standard separate references are made to E26/24 caps used in North America and E26/25 caps used in Japan.
新标准规定了家庭和类似场合普通照明用卤钨灯的能效限定值、节能评价值和试验方法，适用于额定电压小于或等于24V，功率范围为5W~100 W；额定电压为220V~250V，功率范围为15W~500 W普通照明用的非定向卤钨灯，这一产品范围正是白炽灯的使用范围，标准的定制与实施将有效地保障我国淘汰的白炽灯线路图的实施。...
金相显微镜的光源通常采用钨丝白炽灯、卤素灯、碳弧灯及氙灯等。 (1) 钨丝白炽灯 一般中小型显微镜上都配有低压钨丝灯，工作电压一般为6～8V，用一小调压器调节，功率为15～l00W。这种灯适合于金相组织的观察。 (2) 卤素灯(卤钨灯) 目前金相显微镜中供观察用的低压白炽钨丝灯巳逐渐为卤素灯所取代。...
金相显微镜的光源通常采用钨丝白炽灯、卤素灯、碳弧灯及氙灯等。 (1)钨丝白炽灯 一般中小型显微镜上都配有低压钨丝灯。这种灯适合于金相组织的观察。 (2)卤素灯(卤钨灯) 目前金相显微镜中供观察用的低压白炽钨丝灯巳逐渐为卤素灯所取代。这是因为普通灯泡中的钨丝白炽发光时，表面钨会蒸发扩散而聚集在灯泡上，使灯泡发黑，降低照明亮度，同时灯丝也会逐渐变细以至断掉。...
2015Self-ballasted fluorescent lamps for general lighting services - Safety requirements普通照明用自镇流灯的安全要求2015-2-5IEC 61347-1 ed3.0Lamp controlgear - Part 1: General and safety requirements灯的控制装置 第1部分：一般要求和安全要求...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号