IEC 60349-1:1999
电力牵引 铁路与道路车辆用旋转电机 第1部分:除电子变流器供电的交流电动机之外的旋转电机

Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors

作废

IEC 60349-1:1999 发布历史

1 This part of IEC 60349 is applicable to rotating electrical machines, other than electronic convertor-fed alternating current motors, forming part of the equipment of electrically propelled rail and road vehicles. The vehicles may obtain power either from an external supply or from an internal source. The object of this standard is to enable the performance of a machine to be confirmed by tests and to provide a basis for assessment of its suitability for a specified duty and for comparison with other machines. NOTE 1 This standard also applies to machines installed on trailers hauled by electrically propelled vehicles. NOTE 2 The basic requirements of this standard may be applied to rotating electrical machines for special purpose vehicles such as mine locomotives, but it does not cover flameproof or other special features that may be required. NOTE 3 It is not intended that this standard should apply to machines on small road vehicles such as battery-fed delivery vehicles, works trucks, etc. Neither does it apply to minor machines such as windscreen wiper motors, etc. that may be used on all types of vehicles. NOTE 4 Industrial type machines complying with the IEC 60034 series may be suitable for certain auxiliary applications. 2 Electrical inputs or outputs of machines covered by this standard may be as follows: a) direct current (including rectified polyphase alternating current); b) pulsating current (rectified single-phase alternating current); c) unidirectional chopper-controlled current; d) single-phase alternating current; e) polyphase alternating current (in general three-phase). 3 In this standard, the electrical machines concerned are classified as follows. 3.1 Traction motors Motors for propelling rail or road vehicles. 3.2 Engine-driven main generators Generators for supplying power to traction motors on the same vehicle or train. 3.3 Main motor-generator sets Machines obtaining power from a line or battery, and supplying power to traction motors on the same vehicle or train.

IEC 60349-1:1999由国际电工委员会 IX-IEC 发布于 1999-11，并于 2002-08-22 实施，于 2010-10 废止。

IEC 60349-1:1999 在中国标准分类中归属于: S35 牵引电气设备，在国际标准分类中归属于: 29.160.30 电动机,45.060.10 机车。

IEC 60349-1:1999的历代版本如下：

• 2010年 IEC 60349-1:2010 电力牵引.铁路与道路车辆用旋转电机.第1部分:电子交流器供电的交流电动机除外的旋转电机
• 2002年 IEC 60349-1/AMD1:2002 电力牵引.铁路与道路车辆用旋转电机.第1部分:除电子交流器供电的交流电动机之外的旋转电机.修改1
• 2002年 IEC 60349-1:2002 电力牵引.铁路与道路车辆用旋转电机.第1部分:除电子变流器供电的交流电动机之外的旋转电机
• 1999年 IEC 60349-1:1999 电力牵引 铁路与道路车辆用旋转电机 第1部分:除电子变流器供电的交流电动机之外的旋转电机

IEC 60349-1:1999 由 IEC 60349:1991 Traction électrique Machines 6lectriques tournantes des v6hicules ferroviaires et routiers (Edition 2.0) 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 IEC 60349-1:1999 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

IEC 60349-1:1999

发布

1999年

发布单位

国际电工委员会

替代标准

IEC 60349-1:2002

当前最新

IEC 60349-1:2010

 

 

被代替标准

IEC 9/529/FDIS:1999 IEC 60349:1991

适用范围

1 This part of IEC 60349 is applicable to rotating electrical machines, other than electronic convertor-fed alternating current motors, forming part of the equipment of electrically propelled rail and road vehicles. The vehicles may obtain power either from an external supply or from an internal source. The object of this standard is to enable the performance of a machine to be confirmed by tests and to provide a basis for assessment of its suitability for a specified duty and for comparison with other machines. NOTE 1 This standard also applies to machines installed on trailers hauled by electrically propelled vehicles. NOTE 2 The basic requirements of this standard may be applied to rotating electrical machines for special purpose vehicles such as mine locomotives, but it does not cover flameproof or other special features that may be required. NOTE 3 It is not intended that this standard should apply to machines on small road vehicles such as battery-fed delivery vehicles, works trucks, etc. Neither does it apply to minor machines such as windscreen wiper motors, etc. that may be used on all types of vehicles. NOTE 4 Industrial type machines complying with the IEC 60034 series may be suitable for certain auxiliary applications. 2 Electrical inputs or outputs of machines covered by this standard may be as follows: a) direct current (including rectified polyphase alternating current); b) pulsating current (rectified single-phase alternating current); c) unidirectional chopper-controlled current; d) single-phase alternating current; e) polyphase alternating current (in general three-phase). 3 In this standard, the electrical machines concerned are classified as follows. 3.1 Traction motors Motors for propelling rail or road vehicles. 3.2 Engine-driven main generators Generators for supplying power to traction motors on the same vehicle or train. 3.3 Main motor-generator sets Machines obtaining power from a line or battery, and supplying power to traction motors on the same vehicle or train.

IEC 60349-1:1999相似标准

推荐

谁引用了IEC 60349-1:1999 更多引用