IEC/TR 60909-4-2000
三相交流系统中的短路电流 第4部分:短路电流计算举例

Short-circuit currents in three-phase a.c. systems - Part 4: Examples for the calculation of short-circuit currents

IEC/TR 60909-4-2000 发布历史

This part of IEC 60909 is a technical report intended to give help for the application of IEC 60909-0 for the calculation of short-circuit currents in 50 Hz or 60 Hz three-phase a.c. systems. This technical report does not include additional requirements but gives support for the modelling of electrical equipment in the positive-sequence, the negative-sequence and the zero-sequence system (clause 2) and the practical execution of calculations in a low-voltage system (clause 3), a medium-voltage system with asynchronous motors (clause 4) and a power-station unit with its auxiliary network feeding a large number of medium-voltage asynchronous motors and low-voltage motor groups (clause 5). The three examples given in clauses 3, 4 and 5 are similar to those given in IEC 60909 (1988) but they are revised in accordance with IEC 60909-0, which replaces it. A subclause is added to the example in clause 3 to give a comparison between the results found with the application of the equivalent voltage source at the short-circuit location following the procedure given in IEC 60909-0 on the one hand, and results found with the superposition method on the other hand, taking into account different load-flow conditions before the short circuit. Clause 6 of this technical report gives the circuit diagram and the data of a test network and the results for a calculation carried out in accordance with IEC 60909-0, to offer the possibility for a comparison between the results found with a digital program for the calculation of short-circuit currents and the given results for Ik", ip, Ib, Ik, Ik1" and ip1 in a high-voltage network with power-station units, generators, asynchronous motors and lines in four different voltage levels 380 kV, 110 kV, 30 kV and 10 kV.

IEC/TR 60909-4-2000由国际电工委员会 IX-IEC 发布于 2000-07。

IEC/TR 60909-4-2000 在中国标准分类中归属于: K04 基础标准和通用方法，在国际标准分类中归属于: 17.220.01 电学、磁学综合。

IEC/TR 60909-4-2000的历代版本如下：

• 2000年07月 IEC/TR 60909-4-2000 三相交流系统中的短路电流 第4部分:短路电流计算举例

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 IEC/TR 60909-4-2000 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

IEC/TR 60909-4-2000

发布日期

2000年07月

实施日期

废止日期

无

中国标准分类号

K04

国际标准分类号

17.220.01

发布单位

IX-IEC

被代替标准

IEC 73/105/CDV-1998

适用范围

This part of IEC 60909 is a technical report intended to give help for the application of IEC 60909-0 for the calculation of short-circuit currents in 50 Hz or 60 Hz three-phase a.c. systems. This technical report does not include additional requirements but gives support for the modelling of electrical equipment in the positive-sequence, the negative-sequence and the zero-sequence system (clause 2) and the practical execution of calculations in a low-voltage system (clause 3), a medium-voltage system with asynchronous motors (clause 4) and a power-station unit with its auxiliary network feeding a large number of medium-voltage asynchronous motors and low-voltage motor groups (clause 5). The three examples given in clauses 3, 4 and 5 are similar to those given in IEC 60909 (1988) but they are revised in accordance with IEC 60909-0, which replaces it. A subclause is added to the example in clause 3 to give a comparison between the results found with the application of the equivalent voltage source at the short-circuit location following the procedure given in IEC 60909-0 on the one hand, and results found with the superposition method on the other hand, taking into account different load-flow conditions before the short circuit. Clause 6 of this technical report gives the circuit diagram and the data of a test network and the results for a calculation carried out in accordance with IEC 60909-0, to offer the possibility for a comparison between the results found with a digital program for the calculation of short-circuit currents and the given results for Ik", ip, Ib, Ik, Ik1" and ip1 in a high-voltage network with power-station units, generators, asynchronous motors and lines in four different voltage levels 380 kV, 110 kV, 30 kV and 10 kV.

IEC/TR 60909-4-2000系列标准

谁引用了IEC/TR 60909-4-2000 更多引用