IEC 61058-1-2000
电器用开关 第1部分:一般要求

Switches for appliances - Part 1: General requirements

标准号

IEC 61058-1-2000

发布日期

2000年07月

实施日期

废止日期

无

中国标准分类号

K31

国际标准分类号

29.120.40

发布单位

国际电工委员会

代替标准

IEC 61058-1-2016

被代替标准

IEC 23J/220/CDV-2000 IEC 23J/221/FDIS-2000 IEC 61058-1-1996 IEC 61058-1 AMD 1-1997

适用范围

1.1 This International Standard applies to switches (mechanical or electronic) for appliances actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 440 V and a rated current not exceeding 63 A. These switches are intended to be operated by a person, via an actuating member or by actuating a sensing unit. The actuating member or sensing unit can be integral with or arranged separately, either physically or electrically, from the switch and may involve transmission of a signal, for example electrical, optical, acoustic or thermal, between the actuating member or sensing unit and the switch. Switches which incorporate additional control functions governed by the switch function are within the scope of this standard. This standard also covers the indirect actuation of the switch when the operation of the actuating member or sensing unit is provided by a remote control or a part of an appliance or equipment such as a door. NOTE 1 Electronic switches may be combined with mechanical switches giving full disconnection or micro- disconnection. NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electronic disconnection. Therefore, the circuit on the load side is always considered to be live. NOTE 3 For switches used in tropical climates, additional requirements may be necessary. NOTE 4 Attention is drawn to the fact that the standards for appliances may contain additional or alternative requirements for switches. NOTE 5 Throughout this standard, the word "appliance" means "appliance or equipment". NOTE 6 This part of IEC 61058 is applicable when testing incorporated switches. When other types of switches for appliances are tested, this part is applicable together with the relevant IEC 61058-2. This part may, however, be applied for other types of switches which are not mentioned in IEC 61058-2, provided that the electrical safety is not disregarded. 1.2 This standard applies to switches intended to be incorporated in, on or with an appliance. 1.3 This standard also applies to switches incorporating electronic devices. 1.4 This standard also applies to switches for appliances such as - switches intended to be connected to a flexible cable (cord switches); NOTE In this document, the word "cable" means "cable or cord". - switches integrated in an appliance (integrated switches); - switches intended to be mounted apart from the appliance (independently mounted switches) other than those within the scope of IEC 60669-1; - change-over selectors for which, however, particular requirements are given in IEC 61058-2. 1.5 This standard does not contain requirements for isolating switches. NOTE Requirements for isolating switches are under consideration. 1.6 This standard does not apply to devices which control appliances and equipment not actuated intentionally by a person. These are covered by IEC 60730.

IEC 61058-1-2000系列标准

谁引用了IEC 61058-1-2000 更多引用