DIN EN 14791-2006
固定源排放.测定二氧化硫的质量浓度.参照法

Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method; English version of DIN EN 14791:2006-04

DIN EN 14791-2006 发布历史

This European Standard describes a manual method for sampling and determining SO_2 content in ducts and stacks emitting to the atmosphere by two analytical methods: Ion chromatography and Thorin method. This European Standard is the Standard Reference Method (SRM) for periodic monitoring and for calibration or control of Automatic Measuring Systems (AMS) permanently installed on a stack, for regulatory purposes or other purposes. To be used as the SRM, the user shall demonstrate that the performance characteristics of the method are better than the performance criteria defined in this European Standard and that the overall uncertainty of the method is less than _+ 20,0 % relative at the daily Emission Limit Value (ELV). An Alternative Method to this SRM may be used provided that the user can demonstrate equivalence according to the Technical Specification CEN TS 14793, to the satisfaction of his national accreditation body or law. This Standard Reference Method has been evaluated during field tests on waste incineration, co-incineration and large combustion installations. It has been validated for sampling periods of 30 min in the range of (0,5 to 2 000) mg/m3 SO2 for Ion Chromatography variant and 5 mg/m3 to 2 000 mg/m3 SO2 for Thorin method according to emission limit values laid down in the following Council Directives: -- Council Directive 2001/80/EC on the limitation of emissions of certain pollutants into the air from large combustion plants; -- Council Directive 2000/76/EC on waste incineration plants. The limit values of EU Directives are expressed in mg SO_2/m3, on dry basis and at the reference conditions of 273 K and 101,3 kPa.

DIN EN 14791-2006由德国标准化学会 DE-DIN 发布于 2006-04。

DIN EN 14791-2006 在中国标准分类中归属于: Z60 污染物排放综合，在国际标准分类中归属于: 13.040.40 固定源排放限值。

DIN EN 14791-2006 发布之时，引用了标准

• EN 13284-1 *， 2017-11-01 更新

* 在 DIN EN 14791-2006 发布之后有更新，请注意新发布标准的变化。

DIN EN 14791-2006的历代版本如下：

• 2006年04月 DIN EN 14791-2006 固定源排放.测定二氧化硫的质量浓度.参照法
• 2017年05月 DIN EN 14791-2017 固定源排放.测定硫氧化物的质量浓度.标准参照法;德文版本EN 14791-2017

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 14791-2006 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 14791-2006

发布日期

2006年04月

实施日期

废止日期

无

中国标准分类号

Z60

国际标准分类号

13.040.40

发布单位

DE-DIN

引用标准

ENV 13005 EN 13284-1 CEN/TS 14973

代替标准

DIN EN 14791-2017

被代替标准

DIN EN 14791-2004

适用范围

This European Standard describes a manual method for sampling and determining SO_2 content in ducts and stacks emitting to the atmosphere by two analytical methods: Ion chromatography and Thorin method. This European Standard is the Standard Reference Method (SRM) for periodic monitoring and for calibration or control of Automatic Measuring Systems (AMS) permanently installed on a stack, for regulatory purposes or other purposes. To be used as the SRM, the user shall demonstrate that the performance characteristics of the method are better than the performance criteria defined in this European Standard and that the overall uncertainty of the method is less than _+ 20,0 % relative at the daily Emission Limit Value (ELV). An Alternative Method to this SRM may be used provided that the user can demonstrate equivalence according to the Technical Specification CEN TS 14793, to the satisfaction of his national accreditation body or law. This Standard Reference Method has been evaluated during field tests on waste incineration, co-incineration and large combustion installations. It has been validated for sampling periods of 30 min in the range of (0,5 to 2 000) mg/m3 SO2 for Ion Chromatography variant and 5 mg/m3 to 2 000 mg/m3 SO2 for Thorin method according to emission limit values laid down in the following Council Directives: -- Council Directive 2001/80/EC on the limitation of emissions of certain pollutants into the air from large combustion plants; -- Council Directive 2000/76/EC on waste incineration plants. The limit values of EU Directives are expressed in mg SO_2/m3, on dry basis and at the reference conditions of 273 K and 101,3 kPa.