IEC 60297-3-104-2006
电子设备用机械结构件.482.6mm(19in)系列机械结构件尺寸.第3-104部分:分机柜和插入件用连接器接口尺寸

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions for subracks and plug-in units

IEC 60297-3-104-2006 发布历史

This part of IEC 60297 covers the connector dependent interface dimensions for subracks and plug-in units in accordance with subracks of IEC 60297-3-101. In this part of IEC 60297, the two-part connectors of the series IEC 60603-2, IEC 61076-4-101, IEC 61076-4-113 are concerned. Since the connector specific standards contain the dimensions of the connectors only, it is the intention of this part of IEC 60297 to introduce the related subrack and plug-in unit interface dimensions if the connectors mentioned are applied. This standard will also provide dimensional guidelines for the implementation of other connectors by definition of the relationship between subrack mounting pitches and the position of board- type plug-in units and backplanes.

IEC 60297-3-104-2006由国际电工委员会 IX-IEC 发布于 2006-05。

IEC 60297-3-104-2006 在中国标准分类中归属于: L94 电子设备机械结构件，在国际标准分类中归属于: 31.240 电子设备用机械构件。

IEC 60297-3-104-2006 发布之时，引用了标准

• IEC 60603-2-1995 印制板用频率低于3MHz的连接器 第2部分:有质量评定和具有通用普通安装特性、基本网格为2.54 mm (0.1 in)的印制板用两件式连接器详细规范
• IEC 60917-1 修改件1.电子设备实践用机械结构开发的模块化顺序.第1部分:通用标准
• IEC 61076-4-101-2001 电子设备件连接器 第4 -10部分：有质量评定的印制板连接器 符合IEC60917的印制版及底版用基本网格为2.0mm的两件式连接器组件的详细规范
• IEC 61076-4-113-2002 电子设备连接器.印制板连接器.第4-113部分:总线装置中印制板和背板用格栅为2.5mm的5列两件式连接器的详细规范

IEC 60297-3-104-2006的历代版本如下：

• 2006年05月 IEC 60297-3-104-2006 电子设备用机械结构件.482.6mm(19in)系列机械结构件尺寸.第3-104部分:分机柜和插入件用连接器接口尺寸

标准号

IEC 60297-3-104-2006

发布日期

2006年05月

实施日期

废止日期

无

中国标准分类号

L94

国际标准分类号

31.240

发布单位

IX-IEC

引用标准

IEC 60297-3-101 IEC 60603-2-1995 IEC 60917-1 IEC 61076-4-101-2001 IEC 61076-4-113-2002

被代替标准

IEC 48D/337/FDIS-2006

适用范围

This part of IEC 60297 covers the connector dependent interface dimensions for subracks and plug-in units in accordance with subracks of IEC 60297-3-101. In this part of IEC 60297, the two-part connectors of the series IEC 60603-2, IEC 61076-4-101, IEC 61076-4-113 are concerned. Since the connector specific standards contain the dimensions of the connectors only, it is the intention of this part of IEC 60297 to introduce the related subrack and plug-in unit interface dimensions if the connectors mentioned are applied. This standard will also provide dimensional guidelines for the implementation of other connectors by definition of the relationship between subrack mounting pitches and the position of board- type plug-in units and backplanes.

IEC 60297-3-104-2006系列标准

IEC 60297-3-104-2006 中可能用到的仪器设备

谁引用了IEC 60297-3-104-2006 更多引用