DIN EN ISO 5817-2006
焊接.钢、镍、钛及其合金的熔焊接头(束焊除外).缺陷的质量等级(ISO 5817-2003 + Cor.1-2006)

Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003 + Cor. 1:2006); German version EN ISO 5817:2007

DIN EN ISO 5817-2006 发布历史

This International Standard provides quality levels of imperfections in fusion-welded joints (except for beam welding) in all types of steel, nickel, titanium and their alloys. It applies to material thickness above 0,5 mm. It covers fully penetrated butt welds and all fillet welds. The priciples of this International Standard may also be applied to partial-penetration butt welds. Quality levels for beam welded joints in steel are presented in ISO 13919-1. Three quality levels are given in order to permit application to a wide range of welded fabrication. They are designated by symbols B, C and D. Quality level B corresponds to the highest requirement on the finished weld. The quality levels refer to production quality and not to the fitness-for-purpose (see 3.2) of the product manufactured. This International Standard applies to: — unalloyed and alloy steels; — nickel and nickel alloys; — titanium and titanium alloys; — manual, mechanized and automatic welding; — all welding positions; — all types of welds, e.g. butt welds, fillet welds and branch connections; — the following welding processes and their defined sub-processes in accordance with ISO 4063: — 11 metal-arc welding without gas protection; — 12 submerged-arc welding; — 13 gas-shielded metal-arc welding; — 14 gas-shielded welding with non-consumable electrodes; — 15 plasma arc welding; — 31 oxy-fuel gas welding (for steel only). Metallurgical aspects, e.g. grain size, hardness, are not covered by this International Standard.

DIN EN ISO 5817-2006由德国标准化学会 DE-DIN 发布于 2006-10。

DIN EN ISO 5817-2006 在中国标准分类中归属于: J33 焊接与切割，在国际标准分类中归属于: 25.160.40 焊接接头。

DIN EN ISO 5817-2006的历代版本如下：

• 2003年12月 DIN EN ISO 5817-2003 焊接.钢、镍、钛及其合金的熔焊接头(束焊除外).缺陷的质量等级
• 2006年10月 DIN EN ISO 5817-2006 焊接.钢、镍、钛及其合金的熔焊接头(束焊除外).缺陷的质量等级(ISO 5817-2003 + Cor.1-2006)
• 2014年06月01日 DIN EN ISO 5817-2014 焊接.钢、镍、钛及其合金的熔焊接头(束焊除外).缺陷的质量等级

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN ISO 5817-2006 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN ISO 5817-2006

发布日期

2006年10月

实施日期

废止日期

无

中国标准分类号

J33

国际标准分类号

25.160.40

发布单位

DE-DIN

代替标准

DIN EN ISO 5817-2014

适用范围

This International Standard provides quality levels of imperfections in fusion-welded joints (except for beam welding) in all types of steel, nickel, titanium and their alloys. It applies to material thickness above 0,5 mm. It covers fully penetrated butt welds and all fillet welds. The priciples of this International Standard may also be applied to partial-penetration butt welds. Quality levels for beam welded joints in steel are presented in ISO 13919-1. Three quality levels are given in order to permit application to a wide range of welded fabrication. They are designated by symbols B, C and D. Quality level B corresponds to the highest requirement on the finished weld. The quality levels refer to production quality and not to the fitness-for-purpose (see 3.2) of the product manufactured. This International Standard applies to: — unalloyed and alloy steels; — nickel and nickel alloys; — titanium and titanium alloys; — manual, mechanized and automatic welding; — all welding positions; — all types of welds, e.g. butt welds, fillet welds and branch connections; — the following welding processes and their defined sub-processes in accordance with ISO 4063: — 11 metal-arc welding without gas protection; — 12 submerged-arc welding; — 13 gas-shielded metal-arc welding; — 14 gas-shielded welding with non-consumable electrodes; — 15 plasma arc welding; — 31 oxy-fuel gas welding (for steel only). Metallurgical aspects, e.g. grain size, hardness, are not covered by this International Standard.

谁引用了DIN EN ISO 5817-2006 更多引用