DIN EN ISO 8033-2006
橡胶和塑料软管.元件间附着力的测定(ISO 8033:2006)
Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2006); English version of DIN EN ISO 8033:2006-11
DIN EN ISO 8033-2006 发布历史
Adequate adhesion between the various components of a hose is essential if it is to perform satisfactorily in service. This International Standard specifies methods for the determination of the adhesion between lining and reinforcement, between cover and reinforcement, between reinforcement layers, between cover and outer lamination (thin layer of material outside the cover for protection) and between lining and inner lamination (thin layer of material inside the lining to reduce permeation of fluid into the lining). It covers all bore sizes and the following types of hose construction: — woven textile fabric; — braided textile fabric; — knitted textile fabric; — circular-woven textile fabric; — textile spiral; — textile cord; — wire braid; — wire spiral; — hoses containing a supporting helix.
DIN EN ISO 8033-2006由德国标准化学会 DE-DIN 发布于 2006-11。
DIN EN ISO 8033-2006 在中国标准分类中归属于: G42 胶管、胶带、胶布，在国际标准分类中归属于: 23.040.70 软管和软管组件。
DIN EN ISO 8033-2006 发布之时，引用了标准
- ISO 6133 橡胶和塑料.测定撕裂强度和粘合强度所获得的多峰图形的分析*， 2015-08-01 更新
- ISO 5893-2002 橡胶塑料拉力、压力和弯曲试验机(恒速驱动) 技术规范
- ISO 23529 橡胶.物理试验方法用试样制备和整修的一般规程*， 2016-11-01 更新
* 在 DIN EN ISO 8033-2006 发布之后有更新，请注意新发布标准的变化。
DIN EN ISO 8033-2006的历代版本如下：
- 2006年11月 DIN EN ISO 8033-2006 橡胶和塑料软管.元件间附着力的测定(ISO 8033:2006)
- 2017年04月 DIN EN ISO 8033-2017 橡胶和塑料软管.元件间附着力的测定(ISO 8033-2016);德文版本EN ISO 8033-2017
- 标准号
- DIN EN ISO 8033-2006
- 发布日期
- 2006年11月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- G42
- 国际标准分类号
- 23.040.70
- 发布单位
- DE-DIN
- 引用标准
- ISO 6133 ISO 5893-2002 ISO 23529
- 代替标准
- DIN EN ISO 8033-2017
- 被代替标准
- DIN EN ISO 8033-2004 DIN EN 28033-1993
- 适用范围
- Adequate adhesion between the various components of a hose is essential if it is to perform satisfactorily in service. This International Standard specifies methods for the determination of the adhesion between lining and reinforcement, between cover and reinforcement, between reinforcement layers, between cover and outer lamination (thin layer of material outside the cover for protection) and between lining and inner lamination (thin layer of material inside the lining to reduce permeation of fluid into the lining). It covers all bore sizes and the following types of hose construction: — woven textile fabric; — braided textile fabric; — knitted textile fabric; — circular-woven textile fabric; — textile spiral; — textile cord; — wire braid; — wire spiral; — hoses containing a supporting helix.