IEC 62395-1-2006
工业用和商用电阻跟踪加热系统.第1部分:总则和试验要求

Electrical resistance trace heating systems for industrial and commercial applications – Part 1: General and testing requirements (Edition 2.0)

IEC 62395-1-2006 发布历史

This part of IEC 62395 specifies requirements for electrical resistance trace heating systems and includes general test requirements. This standard pertains to trace heating systems that may comprise either factory-fabricated or field-assembled (work-site) units, and which may be series heater cables, parallel heater cables, heater pads or heater panels that have been assembled and/or terminated in accordance with the manufacturer’s instructions for connection to voltage supplies up to and including 450-750 V. This standard also includes requirements for termination assemblies and control methods used with trace heating systems. This standard does not include or provide for any applications in potentially explosive atmospheres. This standard does not cover induction, impedance or skin effect heating. Trace heating systems can be grouped into different types of applications and the different conditions found during and after installation necessitate different requirements for testing. Trace heating systems are usually certified for a specific type of installation or application. Typical applications for the different types of installation include, but are not limited to: a) installations of trace heating for surface heating on pipes, vessels and associated equipment – applications include: – freeze protection and temperature maintenance; – hot water lines; – oil and chemical lines; – sprinkler system mains and supply piping; b) outdoor exposed area installations of trace heating – applications include: – roof de-icing; – gutter and down-spout de-icing; – catch basins and drains; – rail heating2; c) installation with embedded trace heating – applications include: – snow melting; – frost heave protection; – floor warming; – energy storage systems; – door frames; d) installations with trace heating inside conduit or piping – applications include: – snow melting – in conduit; – frost heave protection – in conduit; – floor warming – in conduit; – energy storage systems – in conduit; – internal trace heating for freeze protection of potable water lines; – enclosed drains and culverts.

IEC 62395-1-2006由国际电工委员会 IX-IEC 发布于 2006-08。

IEC 62395-1-2006 在中国标准分类中归属于: K61 工业电热设备，在国际标准分类中归属于: 25.180.10 电炉。

IEC 62395-1-2006的历代版本如下：

• 2006年08月 IEC 62395-1-2006 工业用和商用电阻跟踪加热系统.第1部分:总则和试验要求
• 2013年09月 IEC 62395-1-2013 工业用和商用电阻跟踪加热系统.第1部分:总则和测试要求

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 IEC 62395-1-2006 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

IEC 62395-1-2006

发布日期

2006年08月

实施日期

废止日期

无

中国标准分类号

K61

国际标准分类号

25.180.10

发布单位

IX-IEC

代替标准

IEC 62395-1-2013

适用范围

This part of IEC 62395 specifies requirements for electrical resistance trace heating systems and includes general test requirements. This standard pertains to trace heating systems that may comprise either factory-fabricated or field-assembled (work-site) units, and which may be series heater cables, parallel heater cables, heater pads or heater panels that have been assembled and/or terminated in accordance with the manufacturer’s instructions for connection to voltage supplies up to and including 450-750 V. This standard also includes requirements for termination assemblies and control methods used with trace heating systems. This standard does not include or provide for any applications in potentially explosive atmospheres. This standard does not cover induction, impedance or skin effect heating. Trace heating systems can be grouped into different types of applications and the different conditions found during and after installation necessitate different requirements for testing. Trace heating systems are usually certified for a specific type of installation or application. Typical applications for the different types of installation include, but are not limited to: a) installations of trace heating for surface heating on pipes, vessels and associated equipment – applications include: – freeze protection and temperature maintenance; – hot water lines; – oil and chemical lines; – sprinkler system mains and supply piping; b) outdoor exposed area installations of trace heating – applications include: – roof de-icing; – gutter and down-spout de-icing; – catch basins and drains; – rail heating2; c) installation with embedded trace heating – applications include: – snow melting; – frost heave protection; – floor warming; – energy storage systems; – door frames; d) installations with trace heating inside conduit or piping – applications include: – snow melting – in conduit; – frost heave protection – in conduit; – floor warming – in conduit; – energy storage systems – in conduit; – internal trace heating for freeze protection of potable water lines; – enclosed drains and culverts.

IEC 62395-1-2006系列标准

谁引用了IEC 62395-1-2006 更多引用