SAE AMS 7259D-2001
85至95的低压缩永久变形耐高温和耐流体碳氟化合物(FKM)橡胶密封环.[代替:SAE AMS 7279G,SAE AMS-R-83248A,SAE AMS-R-83248]

Rings, Sealing, Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95 [Superseded: SAE AMS 7279G, SAE AMS-R-83248A, SAE AMS-R-83248]

SAE AMS 7259D-2001 发布历史

This specification covers a fluorocarbon (FKM) rubber in the form of O-rings, O-ring cord, compression seals and molded-in-place gaskets. These products have been used typically as sealing rings, compression seals, and molded-in-place gaskets in contact with air and a wide variety of fuels, lubricants, and specific hydraulic fluids from -29 to +260 degrees C (-200 to +500 degrees F), but usage is not limited to such application, each application however should be considered individually. This class of fluoroelastomers is not recommended for use in high temperature stabilized, HTS, engine oils. Each HTS oil should be evaluated separately.

SAE AMS 7259D-2001由美国机动车工程师协会 US-SAE 发布于 2001-05-01。

SAE AMS 7259D-2001 在中国标准分类中归属于: V21 管件、卡箍、密封件，在国际标准分类中归属于: 49.025.40 橡胶和塑料。

SAE AMS 7259D-2001的历代版本如下：

• 2001年05月01日 SAE AMS 7259D-2001 85至95的低压缩永久变形耐高温和耐流体碳氟化合物(FKM)橡胶密封环.[代替:SAE AMS 7279G,SAE AMS-R-83248A,SAE AMS-R-83248]

SAE AMS 7259D-2001 85至95的低压缩永久变形耐高温和耐流体碳氟化合物(FKM)橡胶密封环.[代替:SAE AMS 7279G,SAE AMS-R-83248A,SAE AMS-R-83248] 于 2013-05-20 变更为 SAE AMS 7259E-2013 橡胶:燃油系统和特殊内燃机油系统里密封剂用氟橡胶(FKM)高温/抗流体阻尼元件/硬度85至95 。

标准号

SAE AMS 7259D-2001

发布日期

2001年05月01日

实施日期

废止日期

无

中国标准分类号

V21

国际标准分类号

49.025.40

发布单位

US-SAE

代替标准

SAE AMS 7259E-2013

适用范围

This specification covers a fluorocarbon (FKM) rubber in the form of O-rings, O-ring cord, compression seals and molded-in-place gaskets. These products have been used typically as sealing rings, compression seals, and molded-in-place gaskets in contact with air and a wide variety of fuels, lubricants, and specific hydraulic fluids from -29 to +260 degrees C (-200 to +500 degrees F), but usage is not limited to such application, each application however should be considered individually. This class of fluoroelastomers is not recommended for use in high temperature stabilized, HTS, engine oils. Each HTS oil should be evaluated separately.