IEC 60730-2-10-2006
家用和类似用途的电气自动控制器.第2-10部分:电动马达启动继电器的特殊要求

Automatic electrical controls for household and similar use - Part 2 10: Particular requirements for electrically operated motor-starting relays

IEC 60730-2-10-2006 发布历史

1.1 Replacement: This part of IEC 60730 applies to controls for automatically controlling the starting windings of single phase motors associated with equipment for household and similar use. This standard applies to motor-starting relays using NTC or PTC thermistors, additional requirements for which are contained in Annex J. 1.1.1 This standard applies to the inherent safety, to the operating values, operating times and operating sequences where such are associated with equipment safety, and to the testing of motor-starting relays used in, or in association with, household or similar equipment. Motor-starting relays for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard does not apply to motor-starting relays designed exclusively for industrial applications. Throughout this standard, the word "equipment" means "appliance and equipment". The words "starting relay" mean "motor-starting relay". 1.1.2 This standard applies to starting relays incorporating electronic devices and starting relays using thermistor elements, thermal elements and magnetic elements. 1.1.3 This standard does not apply to general purpose relays or to contactors and motor starters of the type covered by the IEC 60947 series1. This standard does not apply to mechanical timers or mechanically operated motor-starting devices. 1.1.4 This standard applies to manual controls when such are electrically and/or mechanically integral with starting relays. Requirements for manual switches not forming part of a starting relay are contained in IEC 61058-1. 1.2 Replacement: This standard applies to starting relays with a rated voltage not exceeding 690 V and with a rated current not exceeding 63 A. 1.3 Replacement: This standard does not take into account the response value of an automatic action of a starting relay, if such a response value is dependent upon the method of mounting the starting relay in the equipment. Where a response value is of significant purpose for the protection of the user or surroundings, the value defined in the appropriate household equipment standard or as determined by the manufacturer shall apply. 1.4 Replacement: This standard applies also to motor-starting relays incorporating electronic devices, requirements for which are contained in Annex H.

IEC 60730-2-10-2006由国际电工委员会 IX-IEC 发布于 2006-10。

IEC 60730-2-10-2006 在中国标准分类中归属于: Y60 家用电器基础标准与通用方法，在国际标准分类中归属于: 29.120.70 继电器,97.120 家用自动控制装置。

IEC 60730-2-10-2006的历代版本如下：

• 1991年10月 IEC 60730-2-10-1991 家用和类似用途的电气自动控制器 第2-10部分:电操动的电动机起动继电器特殊要求
• 2006年10月 IEC 60730-2-10-2006 家用和类似用途的电气自动控制器.第2-10部分:电动马达启动继电器的特殊要求

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 IEC 60730-2-10-2006 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

IEC 60730-2-10-2006

发布日期

2006年10月

实施日期

废止日期

无

中国标准分类号

Y60

国际标准分类号

29.120.70;97.120

发布单位

IX-IEC

被代替标准

IEC 72/623/CDV-2004 IEC 72/711/FDIS-2006 IEC 60730-2-10-1991 IEC 60730-2-10 AMD 1-1994 IEC 60730-2-10 AMD 2-2001

适用范围

1.1 Replacement: This part of IEC 60730 applies to controls for automatically controlling the starting windings of single phase motors associated with equipment for household and similar use. This standard applies to motor-starting relays using NTC or PTC thermistors, additional requirements for which are contained in Annex J. 1.1.1 This standard applies to the inherent safety, to the operating values, operating times and operating sequences where such are associated with equipment safety, and to the testing of motor-starting relays used in, or in association with, household or similar equipment. Motor-starting relays for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard does not apply to motor-starting relays designed exclusively for industrial applications. Throughout this standard, the word "equipment" means "appliance and equipment". The words "starting relay" mean "motor-starting relay". 1.1.2 This standard applies to starting relays incorporating electronic devices and starting relays using thermistor elements, thermal elements and magnetic elements. 1.1.3 This standard does not apply to general purpose relays or to contactors and motor starters of the type covered by the IEC 60947 series1. This standard does not apply to mechanical timers or mechanically operated motor-starting devices. 1.1.4 This standard applies to manual controls when such are electrically and/or mechanically integral with starting relays. Requirements for manual switches not forming part of a starting relay are contained in IEC 61058-1. 1.2 Replacement: This standard applies to starting relays with a rated voltage not exceeding 690 V and with a rated current not exceeding 63 A. 1.3 Replacement: This standard does not take into account the response value of an automatic action of a starting relay, if such a response value is dependent upon the method of mounting the starting relay in the equipment. Where a response value is of significant purpose for the protection of the user or surroundings, the value defined in the appropriate household equipment standard or as determined by the manufacturer shall apply. 1.4 Replacement: This standard applies also to motor-starting relays incorporating electronic devices, requirements for which are contained in Annex H.

IEC 60730-2-10-2006系列标准