DIN EN 14879-3-2007
工业装置和设备用防腐蚀物质引起腐蚀的有机涂层系统和衬料.第3部分:混凝土构件涂层
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components; German version EN 14879-3:2006
DIN EN 14879-3-2007 发布历史
This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to concrete process engineering equipment that will come in contact with aggressive chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners). The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings which serve one or more of the following purposes: — to protect the component from damaging effects of aggressive substances; — to protect waters (e.g. ground water) from harmful substances; — to protect the charge from becoming contaminated by components released from the substrate material; — to achieve a particular surface properties. The different coating systems are: a) impregnation, seals, thin coatings (applied by brushing, spraying or rolling); b) high-build coatings (applied by brushing, spraying, rolling, trowelling or pouring (self-levelling)); c) laminate coatings; d) resinous screed; e) mastic asphalt screed with a waterproofing layer; f) combinations of the above coatings. Table 1 shows the coating methods to be employed for various types of concrete members. Handling of aggressive or water pollutant materials is understood to include: 1) storage; 2) filling; 3) loading and unloading; 4) manufacture; 5) treatment; 6) use.
DIN EN 14879-3-2007由德国标准化学会 DE-DIN 发布于 2007-02。
DIN EN 14879-3-2007 在中国标准分类中归属于: A29 材料防护,G50 涂料基础标准与通用方法。
DIN EN 14879-3-2007 发布之时，引用了标准
- EN 59 玻璃纤维增强塑料.巴氏巴柯尔硬度测量*， 2016-02-01 更新
- EN 228 汽车燃料.无铅汽油.要求和试验方法*， 2022-07-18 更新
- EN 590 机动车燃料.柴油.要求和试验方法*， 2013-09-01 更新
- EN 1766 混凝土结构的保护和修整用的产品和系统-试验方法-参考混凝土测试*， 2017-02-01 更新
- EN 12350-1-1999
* 在 DIN EN 14879-3-2007 发布之后有更新，请注意新发布标准的变化。
DIN EN 14879-3-2007的历代版本如下：
- 2007年02月 DIN EN 14879-3-2007 工业装置和设备用防腐蚀物质引起腐蚀的有机涂层系统和衬料.第3部分:混凝土构件涂层
DIN EN 14879-3-2007 工业装置和设备用防腐蚀物质引起腐蚀的有机涂层系统和衬料.第3部分:混凝土构件涂层 由 DIN 28052-6-2001 变更而来。
- 标准号
- DIN EN 14879-3-2007
- 发布日期
- 2007年02月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- A29;G50
- 国际标准分类号
- 25.220.60
- 发布单位
- DE-DIN
- 引用标准
- EN 59 EN 228 EN 590 EN 1766 EN 12350-1-1999
- 被代替标准
- DIN 28052-1-2001 DIN 28052-3-1994 DIN 28052-6-2001 DIN EN 14879-3-2004
- 适用范围
- This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to concrete process engineering equipment that will come in contact with aggressive chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners). The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings which serve one or more of the following purposes: — to protect the component from damaging effects of aggressive substances; — to protect waters (e.g. ground water) from harmful substances; — to protect the charge from becoming contaminated by components released from the substrate material; — to achieve a particular surface properties. The different coating systems are: a) impregnation, seals, thin coatings (applied by brushing, spraying or rolling); b) high-build coatings (applied by brushing, spraying, rolling, trowelling or pouring (self-levelling)); c) laminate coatings; d) resinous screed; e) mastic asphalt screed with a waterproofing layer; f) combinations of the above coatings. Table 1 shows the coating methods to be employed for various types of concrete members. Handling of aggressive or water pollutant materials is understood to include: 1) storage; 2) filling; 3) loading and unloading; 4) manufacture; 5) treatment; 6) use.