DIN EN 14879-2:2007
防侵蚀物体引起腐蚀的工业装置和设备用有机涂层系统和衬料.第2部分:金属构件涂层
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components; English version of DIN EN 14879-2:2007-02
- 标准号
- DIN EN 14879-2:2007
- 发布
- 2007年
- 发布单位
- 德国标准化学会
- 替代标准
- DIN EN 14879-2:2007-02
- 当前最新
- DIN EN 14879-2:2007-02
- 引用标准
- EN 13687-3 EN 14879-1:2005 EN 228 EN 59 EN 590
- 被代替标准
- DIN 28054-1:2000 DIN 28054-2:1992 DIN 28054-3:1994 DIN 28054-4:1995 DIN 28054-5:1996 DIN EN 14879-2:2004
- 适用范围
- This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to metallic process engineering equipment that will come in contact with chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners or been given by national regulations). The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings which serve one or more of the following purposes: — to protect the component from adverse effects of aggressive substances; — to protect waters (e.g. ground water) against hazardous substances; — to protect the charge from becoming contaminated by components released from the substrate material; — to achieve a particular surface properties. * The described coatings are to be used for metallic process engineering equipment that will come in contact with chemical substances. The different coating systems are: — laminate coating systems which contain cold-curing resins; — trowelled coating which contain cold-curing resins; — sprayed coating systems which contain resins (in special cases, such coatings may also be applied by brushing, rolling, flow coating, dipping, or by other means, such as providing sleeving for nozzles); — powder coating systems which contain organic materials (powder coatings may be used as corrosion pro¬tection or for non-stick purposes). For design and preparation of substrate see EN 14879-1.
DIN EN 14879-2:2007相似标准
推荐
科鉴检测四防试验介绍
3.2盐雾试验的环境效应1、物理效应：a.机械部件和组件的活动部分阻塞或卡死；b.由于电解作用导致喷涂层的起泡。2、电气效应：a.盐的沉积物会导致电气设备的损坏；b.产生导电的覆盖层；c.绝缘材料以及金属的腐蚀。3、腐蚀效应：a.电化学反应导致的腐蚀；b.加速应力方面的腐蚀；c.盐在水中电离形成的酸性或碱性溶液。...
leybold莱宝真空泵在使用过程中怎样维护保养
leybold莱宝真空泵的好坏决定于其机械结构和油的质量，使用真空泵时必须把它保护好。如果蒸馏挥发性较大的有机溶剂时，有机溶剂会被油吸收结果增加了蒸气压，从而降低了抽空效能，如果是酸性气体，那就会腐蚀油泵，如果是水蒸气就会使油成乳浊液而抽坏真空泵。 因此使用leybold莱宝真空泵时必须注意下列几点： 在蒸馏系统和真空泵之间，必须装有吸收装置。 ...
全面了解真空泵
腐蚀真空泵腐蚀的形态可分为全面（均匀）腐蚀和局部腐蚀两大类，前者较均匀的发生在真空泵全部表面，后者只是发生在局部，如孔蚀、缝隙腐蚀、晶间腐蚀、应力腐蚀等。采用高分子复合材料对真空泵实施表面有机涂层防腐，其具有良好的耐化学性能及优异的力学性能和粘接性能，与传统的压力容器焊接修补相比，具有施工简便、成本低、安全性能，修复效果好的特点。...