DIN EN 10130-2007
冷成形用冷轧低碳钢平板产品. 技术交货条件
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions; English version of DIN EN 10130:2007-02
DIN EN 10130-2007 发布历史
This European Standard applies to cold rolled uncoated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm and, unless otherwise agreed at the time of inquiry and order, equal to or less than 3 mm, delivered in sheet, coil, slit coil, or cut lengths obtained from slit coil or sheet. It does not apply to cold rolled narrow strip (rolling width < 600 mm) nor to flat cold rolled products for which there is a specific standard, in particular the following: - cold rolled non-grain oriented magnetic steel sheet and strip (EN 10106); - semi-processed steel strip for the construction of magnetic circuits (EN 10126 and EN 10165); - blackplate in coils (EN 10205); - cold rolled flat products in high yield strength steels for cold forming (EN 10268); - cold rolled uncoated non-alloy mild steel narrow strip for cold forming (EN 10139); - cold rolled low carbon steel flat products for vitreous enamelling (EN 10209).
DIN EN 10130-2007由德国标准化学会 DE-DIN 发布于 2007-02。
DIN EN 10130-2007 在中国标准分类中归属于: H46 钢板、钢带，在国际标准分类中归属于: 77.140.50 扁平钢和半成品。
DIN EN 10130-2007 发布之时，引用了标准
- EN 10002-1 金属材料.拉力试验.第1部分:环境温度的试验方法
- EN 10020 钢的等级的定义和分类
- EN 10027-1 钢的命名系统.第1部分:钢名和主要符号-1998
- EN 10027-2 钢的命名系统.第2部分:数字系统*， 2015-04-01 更新
- EN 10049 金属扁平制品的平均粗糙程度Ra和最大数量RPc的测量*， 2022-09-29 更新
* 在 DIN EN 10130-2007 发布之后有更新，请注意新发布标准的变化。
DIN EN 10130-2007的历代版本如下：
- 1991年10月 DIN EN 10130-1991 用于冷变形的低碳钢冷轧板.交货技术条件
- 1999年02月 DIN EN 10130-1999 冷成形用的冷轧低碳钢平板.交货技术条件(包括修正件A1:1998)
- 2007年02月 DIN EN 10130-2007 冷成形用冷轧低碳钢平板产品. 技术交货条件
- 标准号
- DIN EN 10130-2007
- 发布日期
- 2007年02月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- H46
- 国际标准分类号
- 77.140.50
- 发布单位
- DE-DIN
- 引用标准
- EN 10002-1 EN 10020 EN 10027-1 EN 10027-2 EN 10049
- 被代替标准
- DIN EN 10130-1999
- 适用范围
- This European Standard applies to cold rolled uncoated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm and, unless otherwise agreed at the time of inquiry and order, equal to or less than 3 mm, delivered in sheet, coil, slit coil, or cut lengths obtained from slit coil or sheet. It does not apply to cold rolled narrow strip (rolling width < 600 mm) nor to flat cold rolled products for which there is a specific standard, in particular the following: - cold rolled non-grain oriented magnetic steel sheet and strip (EN 10106); - semi-processed steel strip for the construction of magnetic circuits (EN 10126 and EN 10165); - blackplate in coils (EN 10205); - cold rolled flat products in high yield strength steels for cold forming (EN 10268); - cold rolled uncoated non-alloy mild steel narrow strip for cold forming (EN 10139); - cold rolled low carbon steel flat products for vitreous enamelling (EN 10209).