DIN EN 13481-5-2007
轨道交通.铁轨.紧固设备的性能要求.第5部分:平板轨道的紧固设备(包括修改件A1:2006)

Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track(includes Amendment A1:2006); English version of DIN EN 13481-5:2007-06

DIN EN 13481-5-2007 发布历史

This European standard is applicable to fastening systems for use in attaching rails to the uppermost surface of concrete or asphalt slabs in non-ballasted track construction as follows: - main lines having a radius of curvature greater than 150 m and subject to a maximum design axle load of 260 kN; - light rail systems having a radius of curvature greater than 40 m and subject to a maximum design axle load of 130 kN. This includes fastening systems for floating slabs but does not include fastening systems for embedded rails. The requirements apply to the following: a) direct fastening systems ; b) indirect fastening systems; c) fastening systems for the rail sections in EN 13674-1 and 13674-4. d) fastening systems which incorporate concrete elements which each have not more than one supporting element per rail. In the case of (d) the concrete element is considered to be part of the fastening system. If the system includes concrete elements which each have more than one supporting location per rail, those concrete elements are considered to be part of the slab and not part of the fastening system. This standard is not applicable to fastening systems used at bolted joints. This standard is for type approval of a complete fastening assembly only.

DIN EN 13481-5-2007由德国标准化学会 DE-DIN 发布于 2007-06，并于 2007-06-01 实施。

DIN EN 13481-5-2007 在中国标准分类中归属于: S11 线路构件，在国际标准分类中归属于: 93.100 铁路建筑。

DIN EN 13481-5-2007 发布之时，引用了标准

• EN 13146-1 *， 2019-01-01 更新
• EN 13146-4-2002 轨道交通.铁轨.紧固系统试验方法.第4部分:重复加载的影响*， 2022-07-18 更新
• EN 13146-5 铁路设施.路轨.紧固系统试验方法*， 2012-04-01 更新
• EN 13146-6 铁路应用.轨道.紧固系统的试验方法.第6部分:恶劣环境条件的影响*， 2012-04-01 更新
• EN 13146-7 *， 2019-01-01 更新
• EN 13146-8 铁路设施.轨道.紧固设备的试验方法*， 2012-04-01 更新
• EN 13481-1 铁路设施.轨道.紧固系统的性能要求.第1部分:定义;包含A1-2006年8月
• EN 13481-2-2002 铁路设施.轨道.紧固系统的性能要求.第2部分:混凝土枕木紧固系统;包含修改件:A1:08/2006
• ENV 13481-6 轨道交通.轨道.紧固系统的性能要求.第6部分:振动衰减专用紧固系统;合并勘误表2004年7月
• EN 13674-1 铁路设备.轨道.铁轨.46 kg/m以上的机车用丁字型铁轨*， 2011-02-01 更新
• EN 13674-4 轨道交通.轨迹.铁轨.第4部分:大于等于27kg/m小于46kg/m的丁字形铁轨

* 在 DIN EN 13481-5-2007 发布之后有更新，请注意新发布标准的变化。

DIN EN 13481-5-2007的历代版本如下：

• 2003年06月 DIN EN 13481-5-2003 轨道交通.轨道.紧固系统的性能要求.第5部分:加厚钢板制轨道的紧固系统
• 2007年06月 DIN EN 13481-5-2007 轨道交通.铁轨.紧固设备的性能要求.第5部分:平板轨道的紧固设备(包括修改件A1:2006)
• 2012年08月 DIN EN 13481-5-2012 轨道交通.铁轨.紧固设备的性能要求.第5部分:平板轨道的紧固设备.德文版本EN 13481-5-2012

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 13481-5-2007 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 13481-5-2007

发布日期

2007年06月

实施日期

2007年06月01日

废止日期

无

中国标准分类号

S11

国际标准分类号

93.100

发布单位

DE-DIN

引用标准

EN 13146-1 EN 13146-4-2002 EN 13146-5 EN 13146-6 EN 13146-7 EN 13146-8 EN 13481-1 EN 13481-2-2002 ENV 13481-6 EN 13674-1 EN 13674-4

代替标准

DIN EN 13481-5-2012

被代替标准

DIN EN 13481-5/A1-2006 DIN EN 13481-5-2003

适用范围

This European standard is applicable to fastening systems for use in attaching rails to the uppermost surface of concrete or asphalt slabs in non-ballasted track construction as follows: - main lines having a radius of curvature greater than 150 m and subject to a maximum design axle load of 260 kN; - light rail systems having a radius of curvature greater than 40 m and subject to a maximum design axle load of 130 kN. This includes fastening systems for floating slabs but does not include fastening systems for embedded rails. The requirements apply to the following: a) direct fastening systems ; b) indirect fastening systems; c) fastening systems for the rail sections in EN 13674-1 and 13674-4. d) fastening systems which incorporate concrete elements which each have not more than one supporting element per rail. In the case of (d) the concrete element is considered to be part of the fastening system. If the system includes concrete elements which each have more than one supporting location per rail, those concrete elements are considered to be part of the slab and not part of the fastening system. This standard is not applicable to fastening systems used at bolted joints. This standard is for type approval of a complete fastening assembly only.

DIN EN 13481-5-2007系列标准

DIN EN 13481-5-2007 中可能用到的仪器设备