BS 5871-4:2007
煤气加热器、对流式加热器、回火锅炉和装饰性燃料气体器具的安装和维修规范.额定热输入不超过6kW的独立式无烟道煤气加热器、对流式加热器和加热炉(2类和3类家用煤气)

Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect appliances – Part 4: Independent gas-fired flueless fires, convector heaters and heating stoves of nominal heat input


BS 5871-4:2007




购买全文,请联系:


标准号
BS 5871-4:2007
发布
2007年
发布单位
英国标准学会
当前最新
BS 5871-4:2007
 
 
引用标准
BS 5440-2 BS 5482-1 BS 5482-2 BS 669-1 BS 6891 BS 7671 BS 7967-2-2005 BS 7977-1-2002 BS 8423 BS EN 50292 IGE/UP/2
适用范围
This part of BS 5871 specifies installation and maintenance requirements for independent gas-fired flueless fires, convector heaters and heating stoves of nominal heat input not exceeding 6 kW burning 2nd and 3rd family gases for the purpose of heating rooms or internal spaces in domestic (see note 3) or commercial premises. Specifically, it covers: a) fixed appliances that satisfy all the requirements of BS EN 14829; b) fixed appliances that satisfy the combustion requirements of BS EN 14829; c) convector heaters of nominal heat input not exceeding 4.2 kW in the form of greenhouse heaters in respect of single appliance installations. NOTE 1 Appliances a) and b) are only intended as a secondary heat source (see Commentary and Recommendations on 4.2). The heat input and ventilation, fixing and gas supply for convector heaters in the form of greenhouse heaters are specified in 8.4, 9.4 and Clause 11, respectively. This part of BS 5871 covers the selection of a suitable appliance, room sizing and ventilation requirements and other measures necessary to ensure a safe installation. NOTE 2 Heat inputs in this document are based on net calorific value. [See also Commentary and Recommendations on Clause 5, item b).] NOTE 3 As well as normally constructed dwellings, domestic premises include any permanently sited caravans, holiday homes and residential park homes. (See IGE/UP/8 [9].) NOTE 4 Convector heaters in the form of greenhouse heaters are available in two forms, those which are freestanding and those which are intended to be fixed to a wall or floor. This standard is not applicable to: a) mobile and portable appliances conforming to BS EN 449; b) appliances in motor caravans and touring caravans; c) appliances in boats; d) installations in agricultural premises; or e) installations in transportable accommodation units. NOTE 5 For the maintenance of existing installations of 3rd family flueless appliances in boats, see PD 5482-3.

BS 5871-4:2007相似标准


推荐

管状加热器工作原理应用范围

工作原理:管状加热器是一种消耗电能转换为热能,来需加热物料进行加热。在工作中低温流体介质通过管道在压力作用下进入其输入口,沿着电加热容器内部特定换热流道,运用流体热力学原理设计路径,带走电热元件工作中所产生高温热能量,使被加热介质温度升高,电加热器出口得到工艺要求高温介质。...

关于锅炉运行53个老大难问题,专业深入为你解答!

汽轮机高压加热器停运后,锅炉给水温度将比设计值低。给水温度降低后,从给水变为饱和蒸汽所需热量增加很多,如要维持蒸发量,必须增加燃料消耗量。这样不仅使整个炉膛温度提高,炉膛出口烟温升高,且流过过热器烟气数量流速增加,此时若机组带额定负荷,锅炉负荷处于超负荷工况运行,其结果将造成汽温上升。管壁超温;受热面磨损加剧,损坏设备。...

本生灯相关介绍

  德国化学家R.W.本生助手为装备海德堡大学化学实验室而发明煤气燃料加热器具。在本生灯发明前,所用煤气火焰很明亮,但温度不高,是因煤气燃烧不完全造成。本生将其改进为先让煤气空气在灯内充分混合,从而使煤气燃烧完全,得到无光高温火焰。火焰分三层:内层为水蒸气、一氧化碳、氢、二氧化碳氮、氧混合物,温度约300℃,称为焰心。...

测量高炉焦炉煤气烟道气体用什么流量计比较好?

传感器活动部件压力传感部件,不受震动测量精度影响。   3.安装维修简便。在现场条件允许情况下,可以实现不停产安装维护。   4.数字化设计。整体数字化电路测量,测量准确、维修方便。   如果采用RS-485通讯,或HART通讯,还可以实现工厂自动化、集成化管理要求。 ...


谁引用了BS 5871-4:2007 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号