ISO 4427-2:2007由国际标准化组织 IX-ISO 发布于 2007-08。
ISO 4427-2:2007 在中国标准分类中归属于: Q81 供水、排水器材设备,在国际标准分类中归属于: 23.040.20 塑料管。
ISO 4427-2:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.第2部分:管的最新版本是哪一版?
最新版本是 ISO 4427-2:2019/Amd 1:2023 。
This part of ISO 4427 specifies the pipes made from polyethylene (PE) intended for the conveyance of water for human consumption, including raw water prior to treatment and water for general purposes. It also specifies the test parameters for the test methods to which it refers. In conjunction with the other parts of ISO 4427, it is applicable to PE pipes, their joints, to joints with components of PE and to mechanical joints with components of other materials, intended to be used under the following conditions: a) a maximum operating pressure (MOP) up to and including 25 bar1); b) an operating temperature of 20 °C as the reference temperature. NOTE 1 For applications operating at constant temperatures greater than 20 °C and up to 40 °C, see ISO 4427-1:2007, Annex A. NOTE 2 ISO 4427 covers a range of maximum operating pressures and gives requirements concerning colours and additives. It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national guidance or regulations and installation practices or codes. Three types of pipe are specified: ⎯ PE pipes (outside diameter dn), including any identification stripes; ⎯ PE pipes with co-extruded layers on either or both the outside and/or inside of the pipe (total outside diameter dn), as specified in Annex A, where all layers have the same MRS rating. ⎯ PE pipes (outside diameter dn) having a peelable, contiguous, thermoplastics additional layer on the outside of the pipe (“coated pipe”), see Annex A. 1) 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.
GB/T2951.41-2008《电缆和光缆绝缘和护套材料通用试验方法》GB/T3515-2005 《橡胶炭量含量的测定 热解法》GB/T13021-1991《聚乙烯管材和管件炭黑含量的测定仪(热失重法)》YDT 837.3-1996《铜芯聚烯烃绝缘铝塑综合护套市内通信电缆试验方法 第3部分 机械物理性能试验方法》GBT 13663.2-2018 给水用聚乙烯(PE)管道系统 第2部分:管材滁州市神彩颜料科技公司选购我司炭黑含量测试仪...
GB/T2951.41-2008《电缆和光缆绝缘和护套材料通用试验方法》GB/T3515-2005 《橡胶炭量含量的测定 热解法》GB/T13021-1991《聚乙烯管材和管件炭黑含量的测定仪(热失重法)》YDT 837.3-1996《铜芯聚烯烃绝缘铝塑综合护套室内通信电缆试验方法 第3部分 机械物理性能试验方法》GBT 13663.2-2018 给水用聚乙烯(PE)管道系统 第2部分:管材我司炭黑含量测试仪出品以来相继与相继与中广核拓普...
《埋地用聚乙烯(PE)结构壁管道系统 第1部分 聚乙烯双壁波纹管材》8、HDPE缠绕结构壁管检测项目:环刚度...
)管材、管件,广东联塑科技实业有限公司生产的LESSO联塑精品家装管PP-R,金塑企业集团(上海)有限公司生产的PP-R皓白给水管,山东齐鲁武峰塑料制品有限公司生产的齐武牌给水用硬聚氯乙烯(PVC-U)管件,广东永高塑业发展有限公司生产的永高牌给水用聚乙烯(PE)管,深圳市永高塑业发展有限公司生产的联泰牌给水用硬聚氯乙烯(PVC-U)管材,广东乐安家建材有限公司生产的乐安家牌冷热水用氯化聚氯乙烯(PVC-C...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号