ISO 19973-3:2007
气压传动.通过测试评定元件的可靠度.第3部分:带活塞杆的气缸

Pneumatic fluid power - Assessment of component reliability by testing - Part 3: Cylinders with piston rod

被代替

ISO 19973-3:2007 发布历史

This part of ISO 19973 provides test procedures for determining reliability of pneumatic cylinders with piston rod by testing and the methods of reporting the results of testing. The general test conditions and the calculation method provided in Part 1 of ISO 19973 apply to the first failure without repairs, but exclude outliers. The lifetime of pneumatic cylinders is usually given in number of cycles or in kilometres. Therefore, whenever the term “time” is used in this part of ISO 19973, this variable is to be understood as cycles or kilometres. This part of ISO 19973 also specifies test equipment and threshold levels for tests to determine the reliability of pneumatic cylinders with piston rods, both single-acting and double-acting. This part of ISO 19973 is intended to be applied to pneumatic piston rod cylinders that conform to ISO 6430, ISO 6432, ISO 15552 and ISO 21287; however, pneumatic piston rod cylinders that do not conform to these International Standards but are used in the same range of operating conditions can be tested in accordance with one of the classes defined in Tables 1 and 2 of this part of ISO 19973. It is necessary that any deviation from this part of ISO 19973 be documented in the test report.

ISO 19973-3:2007由国际标准化组织 IX-ISO 发布于 2007-08-01。

ISO 19973-3:2007 在中国标准分类中归属于: J20 液压与气动装置，在国际标准分类中归属于: 23.100.01 流体动力系统综合。

ISO 19973-3:2007 发布之时，引用了标准

• ISO 1000 SI单位及其倍数单位和一些其他单位应用的建议 修改1
• ISO 10099:2001 气压传动 缸筒 最终检验和验收准则
• ISO 1219-1 流体动力系统和部件.图形符号和电路图.第1部分:常规用途和数据处理应用的图形符号.修改件1*， 2016-04-15 更新
• ISO 15552 气压传动.具有可拆卸安装件的、1000kPa(10 bar)系列、孔径为32mm至320mm的气缸.基础尺寸、安装尺寸和附件尺寸*， 2018-04-01 更新
• ISO 19973-1 气压传动.通过测试评定元件的可靠度.第1部分:通用规程*， 2015-08-01 更新
• ISO 21287 气压传动.气缸.1000 kPa (10 bar) 系列、缸径从 20 mm 到 100 mm的小型缸
• ISO 5598 流体动力系统和部件 - 词汇*， 2020-01-06 更新
• ISO 6430 气压传动 单杆缸1000 kPa(10 bar)系列 整体式安装 缸内径32mm～250mm 安装尺寸
• ISO 6432 气压传动 单杆缸1000 kPa(10 bar)系列 缸内径8mm～25mm.基本尺寸和安装尺寸*， 2015-08-01 更新

* 在 ISO 19973-3:2007 发布之后有更新，请注意新发布标准的变化。

ISO 19973-3:2007的历代版本如下：

• 2015年 ISO 19973-3:2015 气压传动.通过测试评定元件的可靠度.第3部分:带活塞杆的气缸
• 2007年 ISO 19973-3:2007 气压传动.通过测试评定元件的可靠度.第3部分:带活塞杆的气缸

标准号

ISO 19973-3:2007

发布

2007年

发布单位

国际标准化组织

替代标准

ISO 19973-3:2015

当前最新

ISO 19973-3:2015

 

 

引用标准

IEC 60050-191 ISO 1000 ISO 10099:2001 ISO 1219-1 ISO 15552 ISO 19973-1 ISO 21287 ISO 5598 ISO 6430 ISO 6432

适用范围

This part of ISO 19973 provides test procedures for determining reliability of pneumatic cylinders with piston rod by testing and the methods of reporting the results of testing. The general test conditions and the calculation method provided in Part 1 of ISO 19973 apply to the first failure without repairs, but exclude outliers. The lifetime of pneumatic cylinders is usually given in number of cycles or in kilometres. Therefore, whenever the term “time” is used in this part of ISO 19973, this variable is to be understood as cycles or kilometres. This part of ISO 19973 also specifies test equipment and threshold levels for tests to determine the reliability of pneumatic cylinders with piston rods, both single-acting and double-acting. This part of ISO 19973 is intended to be applied to pneumatic piston rod cylinders that conform to ISO 6430, ISO 6432, ISO 15552 and ISO 21287; however, pneumatic piston rod cylinders that do not conform to these International Standards but are used in the same range of operating conditions can be tested in accordance with one of the classes defined in Tables 1 and 2 of this part of ISO 19973. It is necessary that any deviation from this part of ISO 19973 be documented in the test report.

ISO 19973-3:2007相似标准

推荐

谁引用了ISO 19973-3:2007 更多引用