IEC 60300-3-4-2007
可靠性管理.第3-4部分:应用指南.可靠性要求的规范指南
Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements
IEC 60300-3-4-2007 发布历史
This part of IEC 60300 gives guidance on specifying the required dependability characteristics in specifications，together with specifications of procedures and criteria for verification and vaIidation． The guidance provided includes the following： 一advice on specifying quantitative and qualitative reliability，maintainability，availability and maintenance support requirements； ——advice to purchasers of a system on how to ensure that the specified requirements will be fulfilled by suppliers； 一advice to suppliers to help them to meet purchaser requirements． Other documents，such as legislation and governmental regulation may also place requirements on systems and these should be applied in addition to any specifications derived in accordance with this standard． NOTE 1 Whilst mainly addressing system and equipment level reliability．many of the techniques described in the different parts of IEC 60300 may also be applied to products，items or at the component level．The term system is used throughout this standard． NOTE 2 This standard does not give guidance on the management of dependability programmes or on the various activities necessary to fulfil stated availability，reliability，maintainability and maintenance support requirements． For this general guidance，see other standards． NOTE 3 Safety and environment specifications are not directly considered in this guide．However，much of the guidance in this standard could also be applied to safety or environmental specification NOTE 4 Specifications for the dependability of a service are not considered in this guide．This includes the provision of a service such as those provided through Public—Private PartnershiP procurements．
IEC 60300-3-4-2007由国际电工委员会 IX-IEC 发布于 2007-09。
IEC 60300-3-4-2007 在中国标准分类中归属于: L05 可靠性和可维护性，在国际标准分类中归属于: 03.100.40 研究和开发,03.120.01 质量综合,03.120.10 质量管理和质量保证,29.020 电气工程综合。
IEC 60300-3-4-2007 发布之时，引用了标准
- IEC 60300-1 可靠性管理. 第1部分: 管理和应用指南*， 2014-05-01 更新
- IEC 60300-2 可信性管理.第2部分:可信性管理指南
- IEC 60300-3-1 可信性管理.第3-1部分:应用指南.可信性技术分析:方法指南
- IEC 60300-3-2 可信性管理.第3-2部分:应用指南.现场收集可信性数据
- IEC 60300-3-5 可信性管理 第3-5部分：应用指南 可靠性试验条件和统计试验的原则
- IEC 60605-4 设备可靠性试验 第4部分：指数分布的统计规程 点估计，置信区间，预测区间，容差区间
- IEC 60605-6 设备可靠性测试.第6部分:恒定失效率和恒定失效密度的有效性和评估试验
- IEC 60706-2 设备的维修性.第2部分:设计和开发阶段期间的维修性要求和研究
- IEC 60706-3 设备维修性.第3部分:可维修性的验证及可维修性数据的收集、分析与报告
- IEC 60706-5 设备的可维护性.第5部分:易测性和诊断测试
- IEC 61014 可靠性增长大纲
- IEC 61025 故障树分析(FTA)
- IEC 61078 可靠性方框图*， 2016-08-01 更新
- IEC 61123 可靠性测试 - 成功率合规测试计划*， 2019-11-22 更新
- IEC 61124 IEC 61124-2012 cor 1-2013
- IEC 61160 设计评审
- IEC 61164 可靠性增长.统计试验和评估方法
* 在 IEC 60300-3-4-2007 发布之后有更新，请注意新发布标准的变化。
IEC 60300-3-4-2007的历代版本如下：
- 1996年08月 IEC 60300-3-4-1996 可信性管理 第3部分:应用指南 第4节:可信性要求规定指南
- 2007年09月 IEC 60300-3-4-2007 可靠性管理.第3-4部分:应用指南.可靠性要求的规范指南
- IEC 60300-3-4-2022 IEC 60300-3-4-2022
- 标准号
- IEC 60300-3-4-2007
- 发布日期
- 2007年09月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- L05
- 国际标准分类号
- 03.100.40;03.120.01;03.120.10;29.020
- 发布单位
- IX-IEC
- 引用标准
- IEC 60050-191 IEC 60300-1 IEC 60300-2 IEC 60300-3-1 IEC 60300-3-2 IEC 60300-3-5 IEC 60300-3-10 IEC 60300-3-12 IEC 60300-3-14 IEC 60605-4 IEC 60605-6 IEC 60706-2 IEC 60706-3 IEC 60706-5 IEC 61014 IEC 61025 IEC 61078 IEC 61123 IEC 61124 IEC 61160 IEC 61164
- 被代替标准
- IEC 56/1212/FDIS-2007 IEC 60300-3-4-1996
- 适用范围
- This part of IEC 60300 gives guidance on specifying the required dependability characteristics in specifications，together with specifications of procedures and criteria for verification and vaIidation． The guidance provided includes the following： 一advice on specifying quantitative and qualitative reliability，maintainability，availability and maintenance support requirements； ——advice to purchasers of a system on how to ensure that the specified requirements will be fulfilled by suppliers； 一advice to suppliers to help them to meet purchaser requirements． Other documents，such as legislation and governmental regulation may also place requirements on systems and these should be applied in addition to any specifications derived in accordance with this standard． NOTE 1 Whilst mainly addressing system and equipment level reliability．many of the techniques described in the different parts of IEC 60300 may also be applied to products，items or at the component level．The term system is used throughout this standard． NOTE 2 This standard does not give guidance on the management of dependability programmes or on the various activities necessary to fulfil stated availability，reliability，maintainability and maintenance support requirements． For this general guidance，see other standards． NOTE 3 Safety and environment specifications are not directly considered in this guide．However，much of the guidance in this standard could also be applied to safety or environmental specification NOTE 4 Specifications for the dependability of a service are not considered in this guide．This includes the provision of a service such as those provided through Public—Private PartnershiP procurements．