DIN EN 13155-2007
起重机.非固定式荷载提升附属装置已作废

Cranes - Non fixed load lifting attachments; German version EN 13155:2003+A1:2005

DIN EN 13155-2007 发布历史

This European Standard specifies safety requirements for the following non-fixed load lifting attachments for cranes, hoists and manually controlled load manipulating devices: -- plate clamps; -- vacuum lifters; -- self priming, -- non-self priming (pump, venturi, turbine); -- electric lifting magnets (battery fed and main-fed); -- permanent lifting magnets; -- electro-permanent lifting magnets; -- lifting beams; -- C-hooks; -- lifting forks; -- clamps; defined in clause 3. This standard does not specify the additional requirements for: -- non fixed load lifting attachments in direct contact with foodstuffs or pharmaceuticals requiring a high level of cleanliness for hygiene reasons; -- hazards resulting from handling specific hazardous materials (e.g. explosives, hot molten masses, radiating materials); -- hazards caused by operation in an explosive atmosphere; -- hazards caused by noise; -- electrical hazards; -- hazards due to hydraulic and pneumatic components. This standard does not cover the hazards related to mechanical strength of structural elements of attachments designed for more than 20 000 lifting cycles. NOTE The coefficient of utilization specified in clause 5.1.1 ensures that no fatigue verification is needed for less than 20 000 cycles. This is in accordance with the well accepted calculation codes e.g. FEM 1001. This standard does not cover attachments intended to lift above people. This standard does not cover slings, ladles, expanding mandrels, buckets, grabs, or grab buckets. The hazards covered by this European Standard are identified in clause 4. This European Standard does not cover hazards related to the lifting of persons. This European Standard is applicable to non-fixed load lifting attachments which are manufactured after the date of approval by CEN of this standard.

DIN EN 13155-2007由德国标准化学会 DE-DIN 发布于 2007-11，并于 2007-11-01 实施，于 2009-08 废止。

DIN EN 13155-2007 在中国标准分类中归属于: J80 起重机械，在国际标准分类中归属于: 53.020.30 起重设备附件。

DIN EN 13155-2007的历代版本如下：

• 2007年11月 DIN EN 13155-2007 起重机.非固定式荷载提升附属装置
• 2009年08月 DIN EN 13155-2009 起重机.安全性.非固定装载电梯附加装置(包括修改件A2-2009).英文版本DIN EN 13155-2009-08
• 1970年01月 DIN EN 13155-2017 起重机.安全性.非固定装载电梯附加装置;德文和英文版本prEN 13155-2017

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 13155-2007 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 13155-2007

发布日期

2007年11月

实施日期

2007年11月01日

废止日期

2009-08

中国标准分类号

J80

国际标准分类号

53.020.30

发布单位

DE-DIN

代替标准

DIN EN 13155-2009

适用范围

This European Standard specifies safety requirements for the following non-fixed load lifting attachments for cranes, hoists and manually controlled load manipulating devices: -- plate clamps; -- vacuum lifters; -- self priming, -- non-self priming (pump, venturi, turbine); -- electric lifting magnets (battery fed and main-fed); -- permanent lifting magnets; -- electro-permanent lifting magnets; -- lifting beams; -- C-hooks; -- lifting forks; -- clamps; defined in clause 3. This standard does not specify the additional requirements for: -- non fixed load lifting attachments in direct contact with foodstuffs or pharmaceuticals requiring a high level of cleanliness for hygiene reasons; -- hazards resulting from handling specific hazardous materials (e.g. explosives, hot molten masses, radiating materials); -- hazards caused by operation in an explosive atmosphere; -- hazards caused by noise; -- electrical hazards; -- hazards due to hydraulic and pneumatic components. This standard does not cover the hazards related to mechanical strength of structural elements of attachments designed for more than 20 000 lifting cycles. NOTE The coefficient of utilization specified in clause 5.1.1 ensures that no fatigue verification is needed for less than 20 000 cycles. This is in accordance with the well accepted calculation codes e.g. FEM 1001. This standard does not cover attachments intended to lift above people. This standard does not cover slings, ladles, expanding mandrels, buckets, grabs, or grab buckets. The hazards covered by this European Standard are identified in clause 4. This European Standard does not cover hazards related to the lifting of persons. This European Standard is applicable to non-fixed load lifting attachments which are manufactured after the date of approval by CEN of this standard.