ISO 21930:2007
建筑施工的可持续性.建筑制品的环境声明

Sustainability in building construction - Environmental declaration of building products


ISO 21930:2007 发布历史

This International Standard provides the principles and requirements for type III environmental declarations (EPD) of building products. This International Standard contains specifications and requirements for the EPD of building products. Where this International Standard contains more specific requirements, it complements ISO 14025 for the EPD of building products. This International Standard provides a framework for and the basic requirements for product category rules (PCR) as defined in ISO 14025 for type III environmental declarations of building products. Type III environmental declarations for building products, as described in this International Standard, are primarily intended for use in business-to-business communication, but their use in business-to-consumer communication under certain conditions is not precluded. This International Standard does not define requirements for developing type III environmental declaration programmes. Requirements for type III environmental declaration programmes are found in ISO 14025. The working environment is not included in this International Standard because it is normally a subject for national legislation. NOTE In this International Standard, EPD is an abbreviation used to represent both the single and plural full form designation of “environmental product declaration”, which is intended to be synonymous with the designation “type III environmental declaration”. In the practice of developing EPD, programmes or their declarations are referred to by various names such as eco-leaf, eco-profile, environmental declaration of product, environmental product declaration (EPD), and environmental profile.

ISO 21930:2007由国际标准化组织 IX-ISO 发布于 2007-10-01。

ISO 21930:2007 在中国标准分类中归属于: P04 基础标准与通用方法,在国际标准分类中归属于: 91.040.01 建筑物综合。

ISO 21930:2007 发布之时,引用了标准

  • ISO 14001 环境管理系统.使用指南要求*2015-09-01 更新
  • ISO 14020:2000 环境标志和声明 通用原则
  • ISO 14025:2006 环境标志和通报.III型环境通报.原则和程序
  • ISO 14040 环境管理.生命周期评估.原则和框架.修改件1*2023-07-02 更新
  • ISO 14044:2006 环境管理.产品寿命周期评价.要求和导则
  • ISO 14050 环境管理“词汇”修正案1
  • ISO 15392 建筑可持续发展 - 一般原则*2019-12-03 更新
  • ISO 15686-1 建筑物与建筑物资产.使用计划.第1部分:一般原则与框架*2011-05-15 更新
  • ISO 15686-8 房屋和建筑资产.工作寿命计划.第8部分:参考工作寿命和工作寿命估算*2008-06-15 更新
  • ISO 6707-1 建筑与土木工程 - 词汇 - 第1部分:一般条款*2020-08-10 更新
  • ISO/TS 21931-1 建筑施工的可持续性.施工环境性能评定方法的框架.第1部分:建筑物

* 在 ISO 21930:2007 发布之后有更新,请注意新发布标准的变化。

ISO 21930:2007的历代版本如下:

  • 2017年 ISO 21930:2017 建筑和土木工程的可持续性 - 建筑产品和服务的环境产品声明的核心规则
  • 2007年 ISO 21930:2007 建筑施工的可持续性.建筑制品的环境声明
ISO 21930:2007

标准号
ISO 21930:2007
发布
2007年
发布单位
国际标准化组织
替代标准
ISO 21930:2017
当前最新
ISO 21930:2017
 
 
引用标准
ISO 14001 ISO 14020:2000 ISO 14025:2006 ISO 14040 ISO 14044:2006 ISO 14050 ISO 15392 ISO 15686-1 ISO 15686-8 ISO 6707-1 ISO/TS 21931-1

推荐

ISO1716建筑材料燃烧热值试验装置重复性误差要求

  SO1716建筑材料燃烧热值试验装置重复性误差要求   天津循煜科技有限公司研发生产系列建筑材料及制品燃烧性能燃烧热值测定适用范围在恒定热容量氧弹量热法热值测试仪中,测定建筑材料燃烧热值试验。建筑材料及制品燃烧性能燃烧热值测定符合标准有GB8624/GB/T14402-2007以及ISO1716:2002试验标准。   ...

ISO 45001:2018标准转化后承包方安全准则

占地残土、建筑垃圾等,应随时清理,其他生产物资必须摆放整齐,不得破坏企业厂区环境。明确施工安全协议。承包方施工前,必须经企业安全管理员对施工人员进行职业健康安全方面教育;承包方必须编制项目安全作业指导书,并经企业安全部门或人员监督审查通过;承包方施工人员进入企业施工现场作业,必须佩戴劳动保护用品。...

广东中山拟开展一星级绿色建筑评价标识

对通过绿色建筑标识初评项目,再由市土木建筑学会组织专家进行评审。   记者了解到,绿色建筑设计评价标识申请由设计单位提出,绿色建筑运营评价标识申请由建设单位(或者业主单位)提出,鼓励施工单位和物业管理单位等相关单位共同参与申请。   申请标识建筑,必须在规划设计、建筑设计、环境设计和施工等方面体现绿色建筑特色,采用适合于绿色建筑技术、工艺与产品,施工质量、运营管理等具有较高水平。...

关注 | IAF ILAC发布宣传册诠释世界认可日主题

这些服务包括石棉样品、军团菌、噪声声学、隔音和环境空气质量检测,还包括可再生能源安装认证、报警和安全系统安装认证、消防安全检验、石棉检测,军团菌风险评估、压力容器电梯检验等。对消费者  为保证新建建筑物、已有建筑物和通用基础设施安全性建立信心。  为商业和民用建筑可持续性环境和能源性能声明充满信心。...


谁引用了ISO 21930:2007 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号