DIN 11204-2008
紧固件.检验文件.信息和描述表

Fasteners - Inspection documents - List of information and description

DIN 11204-2008 发布历史

This standard applies to fasteners in accordance with DIN ISO 8992 and DIN EN ISO 14589. This standard specifies minimum requirements regarding information groups and sections (i.e. code numbers, designations and definitions) as in DIN EN 10168 to be given in inspection documents as specified in DIN EN 10204, issued for fasteners. The specifications of this standard may also be used for test certificates not issued by the manufacturer and in O cases where the issue of inspection documents in accordance with DIN EN 10204 has been agreed without specifying details as to their content. NOTE 1 An inspection document need not be issued if the manufacturer (code A04) is able to make available on request the information as detailed in the present standard on the basis of the documents accompanying the consignment or a number identifying the product (batch identification code B07). NOTE 2 Since the values given in an inspection document do not represent guaranteed characteristics of the product concerned, an obligation still exists to submit all products to a receiving inspection.

DIN 11204-2008由德国标准化学会 DE-DIN 发布于 2008-02。

DIN 11204-2008 在中国标准分类中归属于: J13 紧固件，在国际标准分类中归属于: 21.060.01 紧固件综合。

DIN 11204-2008 发布之时，引用了标准

• DIN EN 10168 钢产品.检验文件.内容和说明的目录表
• DIN EN 10204 冶金产品.检验文件的类型
• DIN EN 20898-7 紧固件的机械性能.第7部分:公称直径为 1 mm - 10 mm 的螺栓和螺钉的扭力试验和最小扭矩 (ISO 898-7:1992); 德文版本 EN 20898-7:1995
• DIN EN 28839 紧固件的机械性能.有色金属制造的螺栓、螺钉、螺柱和螺母
• DIN EN ISO 898-1 碳钢和合金钢制紧固件的机械性能.第1部分:具有规定性能等级的螺栓、螺钉和螺柱.粗牙螺纹和细齿节螺纹(ISO 898-1-2013).德文版本EN ISO 898-1-2013*， 2013-05-01 更新
• DIN EN ISO 3506-1 耐腐蚀不锈钢紧固件的机械性能.第1部分:螺栓、螺钉和螺柱(ISO 3506-1-2009).德文版本EN ISO 3506-1-2009*， 2010-04-01 更新
• DIN EN ISO 3506-2 耐腐蚀不锈钢紧固件的机械性能.第2部分:螺母(ISO 3506-2-2009).德文版本EN ISO 3506-2-2009*， 2010-04-01 更新
• DIN EN ISO 14589 盲铆钉.机械试验 (ISO 14589:2000); 德文版本 EN ISO 14589:2000
• DIN ISO 8992 紧固件.螺栓、螺钉、螺柱和螺母的一般要求

* 在 DIN 11204-2008 发布之后有更新，请注意新发布标准的变化。

DIN 11204-2008的历代版本如下：

• 2008年02月 DIN 11204-2008 紧固件.检验文件.信息和描述表

DIN 11204-2008 紧固件.检验文件.信息和描述表 于 2018-0501 变更为 DIN EN ISO 16228-2018 紧固件.检验文件类型(ISO 16228-2017);德文版本EN ISO 16228-2018。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN 11204-2008 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN 11204-2008

发布日期

2008年02月

实施日期

废止日期

无

中国标准分类号

J13

国际标准分类号

21.060.01

发布单位

DE-DIN

引用标准

DIN 267-13 DIN EN 10168 DIN EN 10204 DIN EN 20898-2 DIN EN 20898-7 DIN EN 28839 DIN EN ISO 898-1 DIN EN ISO 898-6 DIN EN ISO 3506-1 DIN EN ISO 3506-2 DIN EN ISO 14589 DIN ISO 8992

代替标准

DIN EN ISO 16228-2018

被代替标准

DIN 11204-2007

适用范围

This standard applies to fasteners in accordance with DIN ISO 8992 and DIN EN ISO 14589. This standard specifies minimum requirements regarding information groups and sections (i.e. code numbers, designations and definitions) as in DIN EN 10168 to be given in inspection documents as specified in DIN EN 10204, issued for fasteners. The specifications of this standard may also be used for test certificates not issued by the manufacturer and in O cases where the issue of inspection documents in accordance with DIN EN 10204 has been agreed without specifying details as to their content. NOTE 1 An inspection document need not be issued if the manufacturer (code A04) is able to make available on request the information as detailed in the present standard on the basis of the documents accompanying the consignment or a number identifying the product (batch identification code B07). NOTE 2 Since the values given in an inspection document do not represent guaranteed characteristics of the product concerned, an obligation still exists to submit all products to a receiving inspection.

谁引用了DIN 11204-2008 更多引用