IEC 61326-3-2:2008
测量、控制和实验室用电气设备.电磁兼容性(EMC)的要求.第3-2部分:与安全相关的系统和用于与执行安全相关的功能设备(功能安全)用抗扰度要求.带指定电磁环境的工业设施
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety related functions (functional safety) - Industrial applications w
IEC 61326-3-2:2008 发布历史
IEC 61326-3-2:2008由国际电工委员会 IX-IEC 发布于 2008-01，并于 2017-05-18 实施。
IEC 61326-3-2:2008 在中国标准分类中归属于: K60 电气设备与器具综合，在国际标准分类中归属于: 25.040.40 工业过程的测量和控制,33.100.20 抗扰度。
IEC 61326-3-2:2008 测量、控制和实验室用电气设备.电磁兼容性(EMC)的要求.第3-2部分:与安全相关的系统和用于与执行安全相关的功能设备(功能安全)用抗扰度要求.带指定电磁环境的工业设施的最新版本是哪一版？
最新版本是 IEC 61326-3-2:2017 RLV 。
IEC 61326-3-2:2008 发布之时，引用了标准
- IEC 61000-4-11:2004 电磁兼容性(EMC).第4-11部分:试验和测量技术.电压暂降、短时中断及电压变化抗扰度试验
- IEC 61000-4-29:2000 电磁兼容性(EMC).第4-29部分:试验和测量技术.直流输入电力端口上的电压暂降、短时中断和电压变化抗扰度试验
- IEC 61000-4-2:2001 电磁兼容性.第4-2部分:试验和测量方法.静电放电抗扰试验
- IEC 61000-4-3:2006 电磁兼容性.第4-3部分:试验和测量技术.辐射、射频和电磁场的抗扰性试验
- IEC 61000-4-4:2004 电磁兼容性(EMC).第4-4部分:试验和测量技术.电快速瞬变/猝发抗扰度试验
- IEC 61000-4-5:2005 电磁兼容性(EMC).第4-5部分:试验和测量技术.电涌抗扰试验
- IEC 61000-4-6:2004 电磁兼容性(EMC).第4-6部分:试验和测量技术.对射频场诱发的传导扰动的抗扰度
- IEC 61000-4-8:1993 电磁兼容性(EMC) 第4部分:试验和测量技术 第8节:工频磁场抗扰度试验 基础EMC出版物
- IEC 61000-6-2:2005 电磁兼容性(EMC).第6-2部分:通用标准.工业环境的抗扰度
- IEC 61326-1:2005 测量、控制和实验室用电气设备.电磁兼容性要求.第1部分：一般要求
- IEC 61326-2-1:2005 测量、控制和实验室用电气设备.电磁兼容性要求.第2-1部分:特殊要求.用于电磁兼容性无保护设施的感光试验和测量设备的试验配置、操作条件和性能标准
- IEC 61326-2-2:2005 测量、控制和实验室用电气设备.电磁兼容性要求.第2-2部分:特殊要求.用于低压分布系统的移动式试验、测量和监测设备用试验配置、操作条件和性能标准
- IEC 61326-2-3 测量、控制和实验室用电气设备.电磁兼容性要求.第2-3部分:特殊要求.带集成或远程信号调节的传感器的试验配置、操作条件和性能标准*， 2020-10-26 更新
* 在 IEC 61326-3-2:2008 发布之后有更新，请注意新发布标准的变化。
IEC 61326-3-2:2008的历代版本如下：
- 0000年 IEC 61326-3-2:2017 RLV
- 2013年 IEC 61326-3-2:2008/ISH1:2013 测量, 控制和实验室用电气设备. 电磁兼容性 (EMC) 要求. 第3-2部分: 与安全相关的系统和用于与执行安全相关的功能设备 (功能安全) 用抗扰度要求. 带指定电磁环境的工业设施. 说明表单1
- 2008年 IEC 61326-3-2:2008 测量、控制和实验室用电气设备.电磁兼容性(EMC)的要求.第3-2部分:与安全相关的系统和用于与执行安全相关的功能设备(功能安全)用抗扰度要求.带指定电磁环境的工业设施
IEC 61326-3-2:2008 测量、控制和实验室用电气设备.电磁兼容性(EMC)的要求.第3-2部分:与安全相关的系统和用于与执行安全相关的功能设备(功能安全)用抗扰度要求.带指定电磁环境的工业设施 由 IEC 61326:2002 测量、控制和实验室用电气设备.电磁兼容性要求 变更而来。
The scope of IEC 61326-1 applies to this part of IEC 61326 but is limited to systems and equipment for industrial applications within a specified electromagnetic environment and intended to perform safety functions as defined in IEC 61508 with SIL 1-3. The electromagnetic environments encompassed by this product family standard are industrial, both indoor and outdoor, as they can be found in industrial applications with an electromagnetic environment having specified characteristics (for example, process industry). The difference between the electromagnetic environment covered by this standard compared to the general industrial environment (see IEC 61326-3-1) is due to the mitigation measures employed against electromagnetic phenomena leading to a specified electromagnetic environment. The environment of industrial application with a specified electromagnetic environment typically includes the following characteristics: – industrial area with limited access; – limited use of mobile transmitter; – dedicated cables for power supply and control, signal or communication lines; – separation between power supply and control, signal or communication cables; – factory building mostly consisting of metal construction; – overvoltage/lightning protection by appropriate measures (for example, metal construction of the building or use of protection devices); – pipe heating systems driven by a.c. main power may be present; – no high-voltage substation close to sensitive areas; – presence of CISPR 11 Group 2 ISM equipment using ISM frequencies only with low power; – competent staff; – periodical maintenance of equipment and systems; – mounting and installation guidelines for equipment and systems. A more detailed description of the above-mentioned typical characteristics is given in Annex B. Equipment and systems considered as “proven-in-use” according to IEC 61508 or IEC 61511 are excluded from the scope of IEC 61326-3-2. Fire alarm systems and security alarm systems intended for protection of buildings are excluded from the scope of IEC 61326-3-2.
- 标准号
- IEC 61326-3-2:2008
- 发布
- 2008年
- 发布单位
- 国际电工委员会
- 替代标准
- IEC 61326-3-2:2008/ISH1:2013
- 当前最新
- IEC 61326-3-2:2017 RLV
- 引用标准
- IEC 60050-161 IEC 61000-4-11:2004 IEC 61000-4-29:2000 IEC 61000-4-2:2001 IEC 61000-4-3:2006 IEC 61000-4-4:2004 IEC 61000-4-5:2005 IEC 61000-4-6:2004 IEC 61000-4-8:1993 IEC 61000-6-2:2005 IEC 61326-1:2005 IEC 61326-2-1:2005 IEC 61326-2-2:2005 IEC 61326-2-3
- 被代替标准
- IEC 65A/501/FDIS:2007 IEC 61326:2002 IEC 61326 Corrigendum 1:2002