JIS K7165-2008
塑料.抗拉性能测定.第5部分:单向纤维增强塑料复合材料的试验条件

Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites

JIS K7165-2008 发布历史

1.1 This Standard specifies the test conditions for the determination of the tensile properties of unidirectional fibre-reinforced plastic composites, based upon the general principles given in JIS K 7161. 1.2 The test method is for obtaining tensile strength, modulus of elasticity in tension and tensile stress-strain characteristics under the fixed condition from the tensile behaviour using test specimens. 1.3 The test method is suitable for all polymer matrix systems reinforced with uni- directional fibres. The method is suitable for composites with either thermoplastic or thermosetting matrices, including preimpregnated materials (prepregs). The reinforcements covered include carbon fibres, glass fibres, aramid fibres and other similar fibres. The rein- forcement geometries of unidirectional fibres covered include rovings and unidirectional fabrics and tapes. The method is not normally suitable for multidirectional materials composed of sev- eral unidirectional layers at different angles (see JIS K 7164). 1.4 The method is performed using one of two different types of test specimen, de- pending on the direction of the applied stress relative to the fibre direction (see clause 6). 1.5 In this test method, the standard dimension of the test specimen is specified, be- cause test results obtained using test specimens having different dimensions or the test specimens prepared under the different conditions can not be compared with each other. Other factors, for example, such as test speed or conditioning of the test specimen also have effects on the result. Therefore, when the comparable data is requested, these factors shall be carefully controlled and recorded. NOTE: The International Standard corresponding to this Standard and the symbol of degree of correspondence are as follows. ISO 527-5: 1997 Plastics--Determination of tensile properties Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (MOD)

JIS K7165-2008由日本工业标准调查会 JP-JISC 发布于 2008-03-20。

JIS K7165-2008 在中国标准分类中归属于: G31 合成树脂、塑料基础标准与通用方法，在国际标准分类中归属于: 83.120 增强塑料。

JIS K7165-2008 发布之时，引用了标准

• JIS K7016-1 纤维增强塑料.试验板生产方法.第1部分:通用条件
• JIS K7016-5 增强塑料.试验板的生产方法.第5部分:绕丝法
• JIS K7144 塑料.试样的机加工制备
• JIS K7161-1994 塑料.拉伸特性的测定.第1部分:一般原则
• JIS Z8101-1 统计学.词汇和符号.第1部分:通用统计术语和概率用术语*， 2015-10-20 更新

* 在 JIS K7165-2008 发布之后有更新，请注意新发布标准的变化。

JIS K7165-2008的历代版本如下：

• 2008年03月20日 JIS K7165-2008 塑料.抗拉性能测定.第5部分:单向纤维增强塑料复合材料的试验条件

JIS K7165-2008 塑料.抗拉性能测定.第5部分:单向纤维增强塑料复合材料的试验条件 由 JIS K7054-1995 变更而来。

JIS K7165-2008 塑料.抗拉性能测定.第5部分:单向纤维增强塑料复合材料的试验条件 由 JIS K7073-1988 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 JIS K7165-2008 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

JIS K7165-2008

发布日期

2008年03月20日

实施日期

废止日期

无

中国标准分类号

G31

国际标准分类号

83.120

发布单位

JP-JISC

引用标准

JIS K7016-1 JIS K7016-5 JIS K7144 JIS K7161-1994 JIS Z8101-1 JISO 1268-4

被代替标准

JIS K7054-1995 JIS K7073-1988

适用范围

1.1 This Standard specifies the test conditions for the determination of the tensile properties of unidirectional fibre-reinforced plastic composites, based upon the general principles given in JIS K 7161. 1.2 The test method is for obtaining tensile strength, modulus of elasticity in tension and tensile stress-strain characteristics under the fixed condition from the tensile behaviour using test specimens. 1.3 The test method is suitable for all polymer matrix systems reinforced with uni- directional fibres. The method is suitable for composites with either thermoplastic or thermosetting matrices, including preimpregnated materials (prepregs). The reinforcements covered include carbon fibres, glass fibres, aramid fibres and other similar fibres. The rein- forcement geometries of unidirectional fibres covered include rovings and unidirectional fabrics and tapes. The method is not normally suitable for multidirectional materials composed of sev- eral unidirectional layers at different angles (see JIS K 7164). 1.4 The method is performed using one of two different types of test specimen, de- pending on the direction of the applied stress relative to the fibre direction (see clause 6). 1.5 In this test method, the standard dimension of the test specimen is specified, be- cause test results obtained using test specimens having different dimensions or the test specimens prepared under the different conditions can not be compared with each other. Other factors, for example, such as test speed or conditioning of the test specimen also have effects on the result. Therefore, when the comparable data is requested, these factors shall be carefully controlled and recorded. NOTE: The International Standard corresponding to this Standard and the symbol of degree of correspondence are as follows. ISO 527-5: 1997 Plastics--Determination of tensile properties Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (MOD)

谁引用了JIS K7165-2008 更多引用