This part of IEC 60204 applies to the application of electrical and electronic equipment and systems to hoisting machines and related equipment. NOTE 1 In this standard, the term "electrical" includes both electrical and electronic matters (i.e., "electrical equipment" means both the electrical and the electronic equipment). NOTE 2 In the context of this standard, the term "person" refers to any individual and includes those persons who are assigned and instructed by the user or user's agent(s) in the use and care of the hoisting machine in question. The equipment covered by this standard commences at the point of connection of the supply to the electrical equipment of the hoisting machine (crane-supply-switch) including systems for power supply and control feeders situated outside of the hoisting machine, for example, flexible cables or conductor wires or conductor bars (see Figure 3). NOTE3 For the requirements for the electrical supply installation in buildings, see IEC60364. This standard is applicable to equipment or parts of equipment not exceeding 1 000 V ac. or 1 500 V d.c. between lines and with nominal frequencies not exceeding 200 Hz. NOTE4 For higher voltages, see lEC 60204-11. Additional and special requirements can apply to the electrical equipment of hoisting machines including those that - are intended for use in open air (i.e., outside buildings or other protective structures); - handle or transport potentially explosive material (for example, paint or sawdust); - are intended for use in potentially explosive and/or flammable atmospheres; - are intended for use in mines. For the purposes of this standard, hoisting machines include cranes of all types, winches of all types, and storage and retrieval machines. The following product groups are included: - overhead travelling cranes; - mobile cranes; - tower cranes; - slewing luffing cranes; - gantry cranes; - offshore cranes; - floating cranes; - winches of all types; - hoists and accessories; - loader cranes; - cable cranes; - load holding devices; - storage and retrieval machines; - monorail hoists; - straddle carriers; - rubber tyred gantry cranes (RTGs). This standard does not cover individual items of electrical equipment other than their selection for use and their erection.
IEC 60204-32-2008由国际电工委员会 IX-IEC 发布于 2008-03。
IEC 60204-32-2008 在中国标准分类中归属于: J80 起重机械,在国际标准分类中归属于: 53.020.01 起重设备综合。
* 在 IEC 60204-32-2008 发布之后有更新,请注意新发布标准的变化。
2015年5月19-21日,GB4793.2《测量、控制和实验室用电气设备的安全要求第2部分:电工测量和试验用手持和手操电流传感器的特殊要求》(IEC61010-2-032:2012)、GB4793.11《测量、控制和实验室用电气设备的安全要求第11部分:能测量电网电源电压的家用和专业用手持万用表和其他仪表的特殊要求》(IEC61010-2-033:2012)和GB4793.12《测量、控制和实验室电气设备的安全要求第...
知识点:IEC 60601-1对应的国内标准GB9706.1是医疗器械产品从设计开发、风险评估、标准制定、注册检测等过程实现的重要强制标准。GB9706.1标准导读:《医用电气设备》的安全系列标准由两部分构成:—第1部分:安全通用要求;—第2部分:安全专用要求。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号