DIN EN 10111-2008
冷加工成型的连续热轧低碳钢带和薄钢板.交货技术条件
Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions; English version of DIN EN 10111:2008-06
DIN EN 10111-2008 发布历史
This European Standard specifies the grades of continuously hot rolled Iow carbon steel sheet and strip (in coils) for cold forming. Depending on its actual width, strip is classified as: -- hot rolled wide strip if its width is greater than or equal to 600 mm; -- hot rolled slit wide strip if its width is less than 600 mm. For each grade, it specifies the chemical composition and the mechanical properties. This European Standard is applicable to products of thickness not less than 1,0 mm and not exceeding 11 mm. This European Standard is not applicable to products covered by other standards, such as: -- hot rolled products of non-alloy structural steels for general use (see EN 10025 all parts); -- steel sheet for pressure purposes (see EN 10028 all parts); -- steel sheet for welded gas cylinders (see EN 10120); -- quenched and tempered steels (see EN 10083-1 and EN 10083-2).
DIN EN 10111-2008由德国标准化学会 DE-DIN 发布于 2008-06。
DIN EN 10111-2008 在中国标准分类中归属于: H46 钢板、钢带，在国际标准分类中归属于: 77.140.50 扁平钢和半成品。
DIN EN 10111-2008 发布之时，引用了标准
- EN 10002-1 金属材料.拉力试验.第1部分:环境温度的试验方法
- EN 10021 钢制品的一般技术交货要求*， 2023-01-05 更新
- EN 10027-1 钢的命名系统.第1部分:钢名和主要符号-1998
- EN 10027-2 钢的命名系统.第2部分:数字系统*， 2015-04-01 更新
- EN 10051 非合金钢和合金钢连续热轧的未涂覆板材,薄板材和带材规范.尺寸规格和形状公差*， 2023-01-05 更新
- EN 10079 钢产品定义
- EN 10204 金属材料.检验文件的类型*， 2023-01-05 更新
- EN ISO 14284 钢铁.测定化学成分用的样品的取样和制备
* 在 DIN EN 10111-2008 发布之后有更新，请注意新发布标准的变化。
DIN EN 10111-2008的历代版本如下：
- 1998年03月 DIN EN 10111-1998 冷弯曲成型的连续热轧低碳钢带和薄钢板.交货技术条件
- 2008年06月 DIN EN 10111-2008 冷加工成型的连续热轧低碳钢带和薄钢板.交货技术条件
- 标准号
- DIN EN 10111-2008
- 发布日期
- 2008年06月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- H46
- 国际标准分类号
- 77.140.50
- 发布单位
- 德国标准化学会
- 引用标准
- EN 10002-1 EN 10021 EN 10027-1 EN 10027-2 EN 10051 EN 10079 EN 10204 EN ISO 14284
- 被代替标准
- DIN EN 10111-1998 DIN EN 10111-2006
- 适用范围
- This European Standard specifies the grades of continuously hot rolled Iow carbon steel sheet and strip (in coils) for cold forming. Depending on its actual width, strip is classified as: -- hot rolled wide strip if its width is greater than or equal to 600 mm; -- hot rolled slit wide strip if its width is less than 600 mm. For each grade, it specifies the chemical composition and the mechanical properties. This European Standard is applicable to products of thickness not less than 1,0 mm and not exceeding 11 mm. This European Standard is not applicable to products covered by other standards, such as: -- hot rolled products of non-alloy structural steels for general use (see EN 10025 all parts); -- steel sheet for pressure purposes (see EN 10028 all parts); -- steel sheet for welded gas cylinders (see EN 10120); -- quenched and tempered steels (see EN 10083-1 and EN 10083-2).